banner_page

P1010NXN5HHB

0.8mm PowerPC e500v2 32-bit Microprocessor QorIQ P1 Series P1010 1V 425-FBGA


  • Manufacturer: NXP USA Inc.
  • Nocochips NO: 568-P1010NXN5HHB
  • Package: 425-FBGA
  • Datasheet: PDF
  • Stock: 856
  • Description: 0.8mm PowerPC e500v2 32-bit Microprocessor QorIQ P1 Series P1010 1V 425-FBGA (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Package / Case 425-FBGA
Surface Mount YES
Operating Temperature -40°C~105°C TA
Packaging Tray
Published 2002
Series QorIQ P1
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 425
ECCN Code 3A991.A.2
HTS Code 8542.31.00.01
Technology CMOS
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 260
Supply Voltage 1V
Terminal Pitch 0.8mm
Base Part Number P1010
JESD-30 Code S-PBGA-B425
Supply Voltage-Max (Vsup) 1.05V
Supply Voltage-Min (Vsup) 0.95V
Speed 1.0GHz
uPs/uCs/Peripheral ICs Type MICROPROCESSOR, RISC
Core Processor PowerPC e500v2
Clock Frequency 100MHz
Bit Size 32
Boundary Scan YES
Low Power Mode YES
Format FLOATING POINT
Integrated Cache YES
Ethernet 10/100/1000Mbps (3)
Number of Cores/Bus Width 1 Core 32-Bit
Graphics Acceleration No
RAM Controllers DDR3, DDR3L
USB USB 2.0 + PHY (1)
Additional Interfaces CAN, DUART, I2C, MMC/SD, SPI
SATA SATA 3Gbps (2)
Height Seated (Max) 1.9mm
Length 19mm
RoHS Status ROHS3 Compliant

P1010NXN5HHB Overview


Shipping overseas is convenient thanks to the embedded microprocessor's packaging in 425-FBGA. High reliability is provided by the advanced packaging method Tray. Cores/Bus width of the CPU is 1 Core 32-Bit . K-40°C~105°C TAw what the operating temperature is around -40°C~105°C TA. A QorIQ P1 series item. Core-wise, this CPU has a PowerPC e500v2 processor. The CPU uses DDR3, DDR3L RAM controllers. A CAN, DUART, I2C, MMC/SD, SPI interface has been added to this microprocessor in order to serve the user better. It is a MICROPROCESSOR, RISC in terms of uPs/uCs/Peripheral ICs. Use P1010 when searching for variants of the embedded microprocessor. Overall, there are 425 terminations. When the voltage supply is 1V, the cpu microprocessor should be powered on and run. There is a 32-Bit architecture in it. 1.05V is its maximum supply current. There is a clock frequency of 100MHz on the microprocessor.

P1010NXN5HHB Features


PowerPC e500v2 Core
32-Bit Structure

P1010NXN5HHB Applications


There are a lot of NXP USA Inc. P1010NXN5HHB Microprocessor applications.

  • Speed meter
  • Accu-check
  • Coffee machines
  • Robots
  • Industrial instrumentation devices
  • Washing machine
  • Leakage current tester
  • Measurement and control field
  • Office automation equipment and computer peripherals
  • Mice

Write a review

Note: HTML is not translated!
    Bad           Good