P1011NSE2HFB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 689-BBGA Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | 0°C~125°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | QorIQ P1 |
| JESD-609 Code | e2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 689 |
| ECCN Code | 5A002.A.1 |
| Terminal Finish | TIN COPPER/TIN SILVER |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | P1011 |
| JESD-30 Code | S-PBGA-B689 |
| Supply Voltage-Max (Vsup) | 1.05V |
| Supply Voltage-Min (Vsup) | 0.95V |
| Speed | 800MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e500v2 |
| Clock Frequency | 100MHz |
| Bit Size | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Ethernet | 10/100/1000Mbps (3) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR2, DDR3 |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | DUART, I2C, MMC/SD, SPI |
| Co-Processors/DSP | Security; SEC 3.3 |
| Security Features | Cryptography, Random Number Generator |
| Height Seated (Max) | 2.46mm |
| Length | 31mm |
| RoHS Status | ROHS3 Compliant |
P1011NSE2HFB Overview
With a packing size of 689-BBGA Exposed Pad, this embedded microprocessor is ideal for international shipping. Advanced packaging method Tray is used to provide high reliability. Cores/Bus width is 1 Core 32-Bit. The operating temperature around 0°C~125°C TA should be understood. QorIQ P1 is its series number. The CPU is powered by a PowerPC e500v2 core. There are DDR2, DDR3 RAM controllers on this CPU. Featuring DUART, I2C, MMC/SD, SPI interfaces, this microprocessor can better serve you. I would rate this as a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. Using P1011 will help you find variants of the cpu microprocessor. In total, there are 689 terminations. Turn on the cpu microprocessor and let it run with a 1V voltage supply. It has a 32-Bit architecture. 1.05V is its maximum supply current. A clock frequency of 100MHz is used by the CPU microprocessor.
P1011NSE2HFB Features
PowerPC e500v2 Core
32-Bit Structure
P1011NSE2HFB Applications
There are a lot of NXP USA Inc. P1011NSE2HFB Microprocessor applications.
- Home video and audio
- Digital TVs
- Computers and laptops-video calling, email, blogging
- Set-top boxes
- Dialysis machines (performs function of liver)
- Vacuum cleaners
- Leakage current tester
- Teletext terminals
- Washing machines
- Electronic jamming systems
