P1013NSE2LFB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 689-BBGA Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | 0°C~105°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | QorIQ P1 |
| JESD-609 Code | e2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 689 |
| ECCN Code | 5A002.A.1 |
| Terminal Finish | TIN COPPER/TIN SILVER |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | P1013 |
| JESD-30 Code | S-PBGA-B689 |
| Supply Voltage-Max (Vsup) | 1.05V |
| Supply Voltage-Min (Vsup) | 0.95V |
| Speed | 1.055GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Core Processor | PowerPC e500v2 |
| Clock Frequency | 133MHz |
| Bit Size | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Ethernet | 10/100/1000Mbps (2) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR2, DDR3 |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | DUART, I2C, I2S, MMC/SD, SPI |
| Co-Processors/DSP | Security; SEC |
| Security Features | Cryptography, Random Number Generator |
| Display & Interface Controllers | LCD |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 2.46mm |
| Length | 31mm |
| RoHS Status | ROHS3 Compliant |
P1013NSE2LFB Overview
With a packing size of 689-BBGA Exposed Pad, this embedded microprocessor is ideal for international shipping. Advanced packaging method Tray is used to provide high reliability. This CPU has 1 Core 32-Bit cores and 1 Core 32-Bit bus widths. Extended operating temperature around 0°C~105°C TA. This is a member of the QorIQ P1 series. With a core count of PowerPC e500v2, this CPU is multicore. This CPU uses DDR2, DDR3 RAM controllers. This microprocessor is equipped with an interface of DUART, I2C, I2S, MMC/SD, SPI. uPs/uCs/Peripheral ICs type is MICROPROCESSOR. The microprocessor can be searched for with P1013 if you are looking for variants. The total number of terminations is 689. A 1V voltage supply should be used to turn on and run the cpu microprocessor. In terms of architecture, it is a 32-Bit system. The maximum supply current of this microprocessor is 1.05V. The embedded microprocessor has a clock frequency of 133MHz.
P1013NSE2LFB Features
PowerPC e500v2 Core
32-Bit Structure
P1013NSE2LFB Applications
There are a lot of NXP USA Inc. P1013NSE2LFB Microprocessor applications.
- Smart highways (navigation, traffic control, information monitoring and car service)
- Gas monitoring systems
- Network communication, mobile communication field
- Glucose monitoring systems (for Type 1 Diabetes)
- Sonography (Ultrasound imaging)
- Removable disks
- Kindle
- Microwave ovens
- Heater/Fan
- Home video and audio
