P1013NXN2EFB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 689-BBGA Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | QorIQ P1 |
| JESD-609 Code | e2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 689 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | TIN COPPER/TIN SILVER |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | P1013 |
| JESD-30 Code | S-PBGA-B689 |
| Supply Voltage-Max (Vsup) | 1.05V |
| Supply Voltage-Min (Vsup) | 0.95V |
| Speed | 1.055GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Core Processor | PowerPC e500v2 |
| Clock Frequency | 133MHz |
| Bit Size | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Ethernet | 10/100/1000Mbps (2) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR2, DDR3 |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | DUART, I2C, I2S, MMC/SD, SPI |
| Display & Interface Controllers | LCD |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 2.46mm |
| Length | 31mm |
| RoHS Status | ROHS3 Compliant |
P1013NXN2EFB Overview
Packed in 689-BBGA Exposed Pad, the microprocessor is convenient for shipping overseas. A high level of reliability is provided by using an advanced packaging method Tray. A CPU with 1 Core 32-Bit cores and width 1 Core 32-Bit busses is used. Understand the operating temperature around -40°C~125°C TA. The cpu microprocessor belongs to the QorIQ P1 series. With a core count of PowerPC e500v2, this CPU is multicore. A total of DDR2, DDR3 RAM controllers are used by this CPU. This microprocessor is equipped with an interface of DUART, I2C, I2S, MMC/SD, SPI. I would rate this as a MICROPROCESSOR for the uPs/uCs/Peripheral ICs type. P1013 is a good way to search for variants of the microprocessor. The total number of terminations is 689. A 1V voltage supply should be used to turn on and run the cpu microprocessor. It has a 32-Bit architecture. There is a maximum supply current of 1.05V in this microprocessor. CPU microprocessor clock frequency is 133MHz.
P1013NXN2EFB Features
PowerPC e500v2 Core
32-Bit Structure
P1013NXN2EFB Applications
There are a lot of NXP USA Inc. P1013NXN2EFB Microprocessor applications.
- PDAs, game consoles
- Aerospace navigation systems
- Consumer electronics products
- Guidance-GPS
- Magnetic resonance imaging (MRI)
- Medical instruments chromatographs
- Sonography (Ultrasound imaging)
- Mobile computers
- Medical instruments
- Calculator
