P1014NSE5HFB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 425-FBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~105°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | QorIQ P1 |
| JESD-609 Code | e2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 425 |
| ECCN Code | 5A002.A.1 |
| Terminal Finish | TIN COPPER/TIN SILVER |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | P1014 |
| JESD-30 Code | S-PBGA-B425 |
| Supply Voltage-Max (Vsup) | 1.05V |
| Supply Voltage-Min (Vsup) | 0.95V |
| Speed | 800MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e500v2 |
| Clock Frequency | 100MHz |
| Bit Size | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Ethernet | 10/100/1000Mbps (2) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3, DDR3L |
| USB | USB 2.0 + PHY (1) |
| Additional Interfaces | DUART, I2C, MMC/SD, SPI |
| Co-Processors/DSP | Security; SEC 4.4 |
| Security Features | Boot Security, Cryptography, Random Number Generator, Secure Fusebox |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 1.9mm |
| Length | 19mm |
| RoHS Status | ROHS3 Compliant |
P1014NSE5HFB Overview
Due to its 425-FBGA packaging, it is convenient to ship overseas. High reliability can be achieved by using the advanced packaging method Tray. This CPU has 1 Core 32-Bit cores and 1 Core 32-Bit bus widths. K0°C~105°C TAw what the operating temperature is around 0°C~105°C TA. From the QorIQ P1 series. This CPU is cored with a PowerPC e500v2 processor. There are DDR3, DDR3L RAM controllers used by this CPU. Featuring DUART, I2C, MMC/SD, SPI interfaces, this microprocessor can better serve you. I would rate this as a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. Using P1014 will help you find variants of the cpu microprocessor. The total number of terminations is 425. The microprocessor should be turned on and run with a voltage supply of 1V volts. An architecture based on 32 bits is used. The maximum supply current of this microprocessor is 1.05V. There is 100MHz clock frequency for the microprocessor.
P1014NSE5HFB Features
PowerPC e500v2 Core
32-Bit Structure
P1014NSE5HFB Applications
There are a lot of NXP USA Inc. P1014NSE5HFB Microprocessor applications.
- Wastewater treatment
- Routers
- Auto-breaking system
- Food and beverage
- Industrial instrumentation devices
- Instrumentation and process control field
- Electromechanical control
- Computers and laptops-video calling, email, blogging
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Virtual reality VR robots
