P1014NXN5HFA
| Parameters | |
|---|---|
| Package / Case | 425-FBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2011 |
| Series | QorIQ P1 |
| JESD-609 Code | e2 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 425 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | TIN COPPER/TIN SILVER |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | P1014 |
| JESD-30 Code | S-PBGA-B425 |
| Supply Voltage-Max (Vsup) | 1.05V |
| Supply Voltage-Min (Vsup) | 0.95V |
| Speed | 800MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e500v2 |
| Clock Frequency | 100MHz |
| Bit Size | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Ethernet | 10/100/1000Mbps (2) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3, DDR3L |
| USB | USB 2.0 + PHY (1) |
| Additional Interfaces | DUART, I2C, MMC/SD, SPI |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 1.9mm |
| Length | 19mm |
| RoHS Status | ROHS3 Compliant |
P1014NXN5HFA Overview
Shipping overseas is convenient thanks to the embedded microprocessor's packaging in 425-FBGA. High reliability is achieved by using advanced packaging methods Tray. Cores/Bus width is 1 Core 32-Bit. The operating temperature around -40°C~105°C TA should be understood. The cpu microprocessor belongs to the QorIQ P1 series. Core-wise, this CPU has a PowerPC e500v2 processor. A CPU with this architecture uses DDR3, DDR3L RAM controllers. A DUART, I2C, MMC/SD, SPI interface has been added to this microprocessor in order to serve the user better. The type MICROPROCESSOR, RISC belongs to uPs/uCs/Peripheral ICs. Use P1014 when searching for variants of the embedded microprocessor. Total terminations are 425. The microprocessor should be turned on and run with a voltage supply of 1V volts. The architecture of the microprocessor is 32-bit. The supply voltage should not exceed 1.05V. CPU microprocessors with a clock frequency of 100MHz are used.
P1014NXN5HFA Features
PowerPC e500v2 Core
32-Bit Structure
P1014NXN5HFA Applications
There are a lot of NXP USA Inc. P1014NXN5HFA Microprocessor applications.
- Communication-bluetooth, Wi-Fi, radio
- Microwave ovens
- Day to day life field
- Digital cameras
- Fire alarms
- Computed Tomography (CT scan)
- Heater/Fan
- Automatic control
- Answering machines
- Smartphone
