P1014NXN5HHB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 425-FBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | QorIQ P1 |
| JESD-609 Code | e2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 425 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | TIN COPPER/TIN SILVER |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | P1014 |
| JESD-30 Code | S-PBGA-B425 |
| Supply Voltage-Max (Vsup) | 1.05V |
| Supply Voltage-Min (Vsup) | 0.95V |
| Speed | 800MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e500v2 |
| Clock Frequency | 100MHz |
| Bit Size | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Ethernet | 10/100/1000Mbps (2) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3, DDR3L |
| USB | USB 2.0 + PHY (1) |
| Additional Interfaces | DUART, I2C, MMC/SD, SPI |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 1.9mm |
| Length | 19mm |
| RoHS Status | ROHS3 Compliant |
P1014NXN5HHB Overview
Shipping overseas is convenient thanks to the embedded microprocessor's packaging in 425-FBGA. In order to provide high reliability, advanced packaging method Tray is used. Cores/Bus width is 1 Core 32-Bit. Identify the operating temperature around -40°C~105°C TA. From the QorIQ P1 series. The CPU is cored with a PowerPC e500v2 processor. A total of DDR3, DDR3L RAM controllers are used by this CPU. This microprocessor is equipped with an interface of DUART, I2C, MMC/SD, SPI. There is MICROPROCESSOR, RISC MICROPROCESSOR, RISC in the uPs, uCs, or peripheral ICs categories. The microprocessor can be searched for with P1014 if you are looking for variants. Total terminations are 425. Using a 1V voltage supply, you should be able to operate the cpu microprocessor. In terms of architecture, it is a 32-Bit system. A maximum supply current of 1.05V is available. The embedded microprocessor has a clock frequency of 100MHz.
P1014NXN5HHB Features
PowerPC e500v2 Core
32-Bit Structure
P1014NXN5HHB Applications
There are a lot of NXP USA Inc. P1014NXN5HHB Microprocessor applications.
- Information appliances (networking of household appliances)
- Microwave ovens
- Aerospace navigation systems
- Magnetic resonance imaging (MRI)
- Electronic jamming systems
- Electrocardiogram (EKG)
- Scanners
- Christmas lights
- Industrial instrumentation devices
- Blood pressure monitors
