banner_page

P2010NXE2MHC

1mm PowerPC e500v2 Microprocessor QorIQ P2 Series P2010 1.05V 689-BBGA Exposed Pad


  • Manufacturer: NXP USA Inc.
  • Nocochips NO: 568-P2010NXE2MHC
  • Package: 689-BBGA Exposed Pad
  • Datasheet: PDF
  • Stock: 953
  • Description: 1mm PowerPC e500v2 Microprocessor QorIQ P2 Series P2010 1.05V 689-BBGA Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Package / Case 689-BBGA Exposed Pad
Surface Mount YES
Operating Temperature -40°C~125°C TA
Packaging Tray
Published 2013
Series QorIQ P2
JESD-609 Code e2
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 689
ECCN Code 5A002.A.1
Terminal Finish TIN COPPER/TIN SILVER
HTS Code 8542.31.00.01
Technology CMOS
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 260
Supply Voltage 1.05V
Terminal Pitch 1mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number P2010
JESD-30 Code S-PBGA-B689
Supply Voltage-Max (Vsup) 1.1V
Supply Voltage-Min (Vsup) 1V
Speed 1.2GHz
uPs/uCs/Peripheral ICs Type MICROPROCESSOR, RISC
Core Processor PowerPC e500v2
Clock Frequency 100MHz
Address Bus Width 16
Boundary Scan YES
Low Power Mode YES
External Data Bus Width 64
Format FLOATING POINT
Integrated Cache YES
Ethernet 10/100/1000Mbps (3)
Number of Cores/Bus Width 1 Core 32-Bit
Graphics Acceleration No
RAM Controllers DDR2, DDR3
USB USB 2.0 + PHY (2)
Additional Interfaces DUART, I2C, MMC/SD, SPI
Co-Processors/DSP Security; SEC 3.3
Security Features Cryptography, Random Number Generator
Height Seated (Max) 2.46mm
Length 31mm
RoHS Status ROHS3 Compliant

P2010NXE2MHC Overview


The microprocessor is convenient for international shipping since it is packaged in 689-BBGA Exposed Pad. In order to provide high reliability, advanced packaging method Tray is used. 1 Core 32-Bit cores/Bus width are present in the CPU. Be aware of the operating temperature around -40°C~125°C TA. In the QorIQ P2 series, it is found. This CPU is cored with a PowerPC e500v2 processor. The CPU contains DDR2, DDR3 RAM controllers. This microprocessor features DUART, I2C, MMC/SD, SPI interfaces to better serve its users. I would rate this as a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. Search P2010 for variants of the embedded microprocessor. In total, there are 689 terminations. A 1.05V voltage supply should be used to turn on and run the cpu microprocessor. The supply voltage should not exceed 1.1V. With a 64 width external data bus, this CPU has a wide external data bus. There is 100MHz clock frequency for the microprocessor.

P2010NXE2MHC Features


PowerPC e500v2 Core

P2010NXE2MHC Applications


There are a lot of NXP USA Inc. P2010NXE2MHC Microprocessor applications.

  • Medical instruments
  • Process control devices
  • Calculators
  • Washing machine
  • Dryers
  • Heater/Fan
  • Fax machines
  • Safety -airbags, automatic braking system (ABS)
  • Computed Tomography (CT scan)
  • Set-top boxes

Write a review

Note: HTML is not translated!
    Bad           Good