P2020NSN2KFC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 689-BBGA Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | 0°C~125°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | QorIQ P2 |
| JESD-609 Code | e2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 689 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | TIN COPPER/TIN SILVER |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.05V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | P2020 |
| JESD-30 Code | S-PBGA-B689 |
| Supply Voltage-Max (Vsup) | 1.1V |
| Power Supplies | 1.05V |
| Supply Voltage-Min (Vsup) | 1V |
| Speed | 1.2GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e500v2 |
| Clock Frequency | 100MHz |
| Bit Size | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Ethernet | 10/100/1000Mbps (3) |
| Number of Cores/Bus Width | 2 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR2, DDR3 |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | DUART, I2C, MMC/SD, SPI |
| Height Seated (Max) | 2.46mm |
| Length | 31mm |
| RoHS Status | ROHS3 Compliant |
P2020NSN2KFC Overview
Since the microprocessor is packed in 689-BBGA Exposed Pad, shipping overseas is convenient. High reliability is achieved using advanced packaging method Tray. The CPU has 2 Core 32-Bit cores/Bus width. Understand how the operating temperature around 0°C~125°C TA is determined. QorIQ P2 is its series number. A PowerPC e500v2 processor is present in this CPU. DDR2, DDR3 RAM controllers are used by this CPU. With its DUART, I2C, MMC/SD, SPI interfaces, this microprocessor will be able to serve you better. In terms of uPs and uCs as well as peripheral ICs, this is a MICROPROCESSOR, RISC. Search P2020 for variants of the embedded microprocessor. In total, there are 689 terminations. A 1.05V voltage supply should be used to turn on and run the cpu microprocessor. There are 32 bits in its architecture. The supply voltage should not exceed 1.1V. The cpu microprocessor Microprocessors is typical. CPU microprocessor clock frequency is 100MHz. In the datasheet, 1.05V power supplies are required for this embedded microprocessor.
P2020NSN2KFC Features
PowerPC e500v2 Core
32-Bit Structure
P2020NSN2KFC Applications
There are a lot of NXP USA Inc. P2020NSN2KFC Microprocessor applications.
- Tape drives
- Ipad
- Fax machines
- Pacemakers (used to control abnormal heart rhythm)
- Petrochemical
- Gas monitoring systems
- Smart instruments
- Accu-check
- Fax machines
- Smartphone
