P2020NXN2HFC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 689-BBGA Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | QorIQ P2 |
| JESD-609 Code | e2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 689 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | TIN COPPER/TIN SILVER |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.05V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | P2020 |
| JESD-30 Code | S-PBGA-B689 |
| Supply Voltage-Max (Vsup) | 1.1V |
| Power Supplies | 1.05V |
| Supply Voltage-Min (Vsup) | 1V |
| Speed | 1.2GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e500v2 |
| Clock Frequency | 100MHz |
| Bit Size | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Ethernet | 10/100/1000Mbps (3) |
| Number of Cores/Bus Width | 2 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR2, DDR3 |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | DUART, I2C, MMC/SD, SPI |
| Height Seated (Max) | 2.46mm |
| Length | 31mm |
| RoHS Status | ROHS3 Compliant |
P2020NXN2HFC Overview
The microprocessor is convenient for international shipping since it is packaged in 689-BBGA Exposed Pad. A high level of reliability is provided by using an advanced packaging method Tray. There are 2 Core 32-Bit cores/bus width on the CPU. Recognize operating temperatures around -40°C~125°C TA. From the QorIQ P2 series. This CPU is cored with a PowerPC e500v2 processor. This CPU uses DDR2, DDR3 RAM controllers. This microprocessor features interfaces DUART, I2C, MMC/SD, SPI. It is a MICROPROCESSOR, RISC in terms of uPs/uCs/Peripheral ICs. P2020 is a good way to search for variants of the microprocessor. Total terminations are 689. A 1.05V voltage supply should be used to turn on and run the cpu microprocessor. In terms of architecture, it is a 32-Bit system. With a maximum supply current of 1.1V, it has a maximum power consumption. Microprocessors is a typical embedded microprocessor. There is a clock frequency of 100MHz on the microprocessor. The micro processor requires 1.05V power supplies according to the datasheets.
P2020NXN2HFC Features
PowerPC e500v2 Core
32-Bit Structure
P2020NXN2HFC Applications
There are a lot of NXP USA Inc. P2020NXN2HFC Microprocessor applications.
- Data acquisition and control
- Xbox
- Glucose monitoring systems (for Type 1 Diabetes)
- Medical instruments chromatographs
- Consumer electronics products
- Toys
- Process control devices
- Instrumentation and process control field
- Scanners
- Nintendo
