P2041NXN7PNC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 780-BFBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Series | QorIQ P2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 780 |
| ECCN Code | 3A991.A.1 |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | S-PBGA-B780 |
| Supply Voltage-Max (Vsup) | 1.04V |
| Supply Voltage-Min (Vsup) | 0.96V |
| Speed | 1.5GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e500mc |
| Clock Frequency | 133MHz |
| Address Bus Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 64 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1V 1.35V 1.5V 1.8V 2.5V 3.3V |
| Ethernet | 10/100/1000Mbps (5), 10Gbps (1) |
| Number of Cores/Bus Width | 4 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3, DDR3L |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | DUART, I2C, MMC/SD, RapidIO, SPI |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 2.51mm |
| Length | 23mm |
| RoHS Status | ROHS3 Compliant |
P2041NXN7PNC Overview
Shipping overseas is convenient since the embedded microprocessor is packed in 780-BFBGA, FCBGA. CPUs have 4 Core 32-Bit cores/bus width. K-40°C~105°C TAw what the operating temperature is around -40°C~105°C TA. This is part of the QorIQ P2 series. This CPU is cored with a PowerPC e500mc processor. Memory controllers for this CPU are DDR3, DDR3L. A DUART, I2C, MMC/SD, RapidIO, SPI interface has been added to this microprocessor in order to serve the user better. As far as I/O is concerned, this CPU runs at 1V 1.35V 1.5V 1.8V 2.5V 3.3V. There is MICROPROCESSOR, RISC MICROPROCESSOR, RISC in the uPs, uCs, or peripheral ICs categories. Total terminations are 780. A 1V voltage supply should be used to turn on and run the cpu microprocessor. The maximum supply current is 1.04V. 64 is the width of the external data bus on this CPU. There is 133MHz clock frequency for the microprocessor.
P2041NXN7PNC Features
PowerPC e500mc Core
P2041NXN7PNC Applications
There are a lot of NXP USA Inc. P2041NXN7PNC Microprocessor applications.
- Agriculture, transportation field
- Wastewater treatment
- Pacemakers (used to control abnormal heart rhythm)
- Dryers
- Set-top boxes
- Day to day life field
- Robots
- Vacuum cleaners
- Torpedo guidance
- Digital set-top boxes
