P3041NSE7NNC
| Parameters | |
|---|---|
| Co-Processors/DSP | Security; SEC 4.2 |
| Security Features | Boot Security, Cryptography, Random Number Generator, Secure Fusebox |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 3.53mm |
| Length | 37.5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Package / Case | 1295-BBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~105°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | QorIQ P3 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | 5A002.A.1 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | P3041 |
| JESD-30 Code | S-PBGA-B1295 |
| Supply Voltage-Max (Vsup) | 1.05V |
| Supply Voltage-Min (Vsup) | 0.95V |
| Speed | 1.333GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e500mc |
| Clock Frequency | 133MHz |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.5V 1.8V 2.5V 3.3V |
| Ethernet | 10/100/1000Mbps (5), 10Gbps (1) |
| Number of Cores/Bus Width | 4 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3, DDR3L |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | DUART, I2C, MMC/SD, RapidIO, SPI |
P3041NSE7NNC Overview
The embedded microprocessor has been packed in 1295-BBGA, FCBGA for convenient overseas shipping. High reliability is achieved by using advanced packaging methods Tray. This CPU has 4 Core 32-Bit cores and 4 Core 32-Bit bus widths. Obtain a basic understanding of operating temperature around 0°C. The cpu microprocessor belongs to the QorIQ P3 series. The CPU is cored with a PowerPC e500mc processor. It has DDR3, DDR3L RAM controllers. The microprocessor features interfaces DUART, I2C, MMC/SD, RapidIO, SPI for better service. There is 1.5V 1.8V 2.5V 3.3V I/O running on this CPU. There is MICROPROCESSOR, RISC MICROPROCESSOR, RISC in the uPs, uCs, or peripheral ICs categories. To find variants of the microprocessor, try searching with P3041. The microprocessor should be turned on and run with a voltage supply of 1V volts. With a maximum supply current of 1.05V, it has a maximum power consumption. 133MHz is the clock frequency of the embedded microprocessor.
P3041NSE7NNC Features
PowerPC e500mc Core
P3041NSE7NNC Applications
There are a lot of NXP USA Inc. P3041NSE7NNC Microprocessor applications.
- X-ray
- Xbox
- Guidance-GPS
- Digital TVs
- Information appliances (networking of household appliances)
- Copiers
- Robotic prosthetic limbs
- Laminators
- Kindle
- Volt meter
