P3041NXE7MMC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 1295-BBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | QorIQ P3 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | 5A002.A.1 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | P3041 |
| JESD-30 Code | S-PBGA-B1295 |
| Supply Voltage-Max (Vsup) | 1.05V |
| Supply Voltage-Min (Vsup) | 0.95V |
| Speed | 1.2GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e500mc |
| Clock Frequency | 133MHz |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.5V 1.8V 2.5V 3.3V |
| Ethernet | 10/100/1000Mbps (5), 10Gbps (1) |
| Number of Cores/Bus Width | 4 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3, DDR3L |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | DUART, I2C, MMC/SD, RapidIO, SPI |
| Co-Processors/DSP | Security; SEC 4.2 |
| Security Features | Boot Security, Cryptography, Random Number Generator, Secure Fusebox |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 3.53mm |
| Length | 37.5mm |
| RoHS Status | ROHS3 Compliant |
P3041NXE7MMC Overview
The embedded microprocessor has been packed in 1295-BBGA, FCBGA for convenient overseas shipping. A high level of reliability is provided by using an advanced packaging method Tray. There are 4 Core 32-Bit cores/bus width on the CPU. Understand how the operating temperature around -40°C~105°C TA is determined. QorIQ P3 is its series number. A PowerPC e500mc processor is present in this CPU. A CPU with this architecture uses DDR3, DDR3L RAM controllers. The microprocessor features interfaces DUART, I2C, MMC/SD, RapidIO, SPI for better service. The CPU runs I/O at 1.5V 1.8V 2.5V 3.3V. uPs/uCs/Peripheral ICs type is MICROPROCESSOR, RISC. The microprocessor can be searched for with P3041 if you are looking for variants. You should be able to turn on and run the embedded microprocessor with a voltage supply of 1V. The maximum supply current of this microprocessor is 1.05V. There is a clock frequency of 133MHz on the microprocessor.
P3041NXE7MMC Features
PowerPC e500mc Core
P3041NXE7MMC Applications
There are a lot of NXP USA Inc. P3041NXE7MMC Microprocessor applications.
- Blood pressure monitors
- Electronic jamming systems
- Tape drives
- Automatic control
- Fax machines
- Nintendo
- Telephone sets
- Smart highways (navigation, traffic control, information monitoring and car service)
- Information appliances (networking of household appliances)
- Industrial robot
