P3041NXE7NNC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 1295-BBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | QorIQ P3 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | 5A002.A.1 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | P3041 |
| JESD-30 Code | S-PBGA-B1295 |
| Supply Voltage-Max (Vsup) | 1.05V |
| Supply Voltage-Min (Vsup) | 0.95V |
| Speed | 1.333GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e500mc |
| Clock Frequency | 133MHz |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.5V 1.8V 2.5V 3.3V |
| Ethernet | 10/100/1000Mbps (5), 10Gbps (1) |
| Number of Cores/Bus Width | 4 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3, DDR3L |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | DUART, I2C, MMC/SD, RapidIO, SPI |
| Co-Processors/DSP | Security; SEC 4.2 |
| Security Features | Boot Security, Cryptography, Random Number Generator, Secure Fusebox |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 3.53mm |
| Length | 37.5mm |
| RoHS Status | ROHS3 Compliant |
P3041NXE7NNC Overview
Shipping overseas is convenient since the embedded microprocessor is packed in 1295-BBGA, FCBGA. The packaging method Tray provides high reliability. A CPU with 4 Core 32-Bit cores and width 4 Core 32-Bit busses is used. Recognize operating temperatures around -40°C~105°C TA. It comes from the QorIQ P3 series. PowerPC e500mc processors are embedded in this CPU. There are DDR3, DDR3L RAM controllers used by this CPU. A DUART, I2C, MMC/SD, RapidIO, SPI interface has been added to this microprocessor in order to serve the user better. In this CPU, I/O is set to 1.5V 1.8V 2.5V 3.3V. In terms of uPs and uCs as well as peripheral ICs, this is a MICROPROCESSOR, RISC. If you are looking for variants of the cpu microprocessor, try search with P3041. The microprocessor should be turned on and run with a voltage supply of 1V volts. The supply voltage should not exceed 1.05V. CPU microprocessor clock frequency is 133MHz.
P3041NXE7NNC Features
PowerPC e500mc Core
P3041NXE7NNC Applications
There are a lot of NXP USA Inc. P3041NXE7NNC Microprocessor applications.
- Dialysis machines (performs function of liver)
- Nintendo
- Telephone sets
- Instrument control
- Dryers
- Smart highways (navigation, traffic control, information monitoring and car service)
- Electronic jamming systems
- Sonography (Ultrasound imaging)
- Projectors
- Fax machines
