P5010NSE1QMB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 1295-BBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~105°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | QorIQ P5 |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | 5A002.A.1 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | P5010 |
| JESD-30 Code | S-PBGA-B1295 |
| Supply Voltage-Max (Vsup) | 1.15V |
| Supply Voltage-Min (Vsup) | 1.05V |
| Speed | 2.0GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e5500 |
| Clock Frequency | 166MHz |
| Address Bus Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 64 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Ethernet | 1Gbps (5), 10Gbps (1) |
| Number of Cores/Bus Width | 1 Core 64-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3, DDR3L |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | DUART, I2C, MMC/SD, SPI |
| Co-Processors/DSP | Security; SEC 4.2 |
| Security Features | Boot Security, Cryptography, Secure Fusebox, Secure JTAG, Secure Memory, Tamper Detection |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 3.53mm |
| Length | 37.5mm |
| RoHS Status | ROHS3 Compliant |
P5010NSE1QMB Overview
Shipping overseas is convenient since the embedded microprocessor is packed in 1295-BBGA, FCBGA. High reliability is achieved by using advanced packaging methods Tray. CPUs have 1 Core 64-Bit cores/bus width. It is important to understand the operating temperature around 0°C~105°C TA. In the QorIQ P5 series, it is found. PowerPC e5500 is the processor core of this CPU. DDR3, DDR3L RAM controllers are used by this CPU. With its DUART, I2C, MMC/SD, SPI interfaces, this microprocessor will be able to serve you better. uPs/uCs/Peripheral ICs type is MICROPROCESSOR, RISC. Use P5010 when searching for variants of the embedded microprocessor. You should be able to turn on and run the embedded microprocessor with a voltage supply of 1.1V. Supply current is maximum at 1.15V. This CPU has a wide external data Bus width of 64. In this CPU microprocessor, the clock frequency is 0 Hz.
P5010NSE1QMB Features
PowerPC e5500 Core
P5010NSE1QMB Applications
There are a lot of NXP USA Inc. P5010NSE1QMB Microprocessor applications.
- Blenders
- Printers
- ECG machine
- Electromechanical control
- Multi-meter
- Dishwashers
- Data acquisition and control
- Network application field
- Entertainment-radios, CD players, televisions
- 3D printers
