P5010NXN1QMB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 1295-BBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | QorIQ P5 |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | 3A991.A.1 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | P5010 |
| JESD-30 Code | S-PBGA-B1295 |
| Supply Voltage-Max (Vsup) | 1.15V |
| Supply Voltage-Min (Vsup) | 1.05V |
| Speed | 2.0GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e5500 |
| Clock Frequency | 166MHz |
| Address Bus Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 64 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Ethernet | 1Gbps (5), 10Gbps (1) |
| Number of Cores/Bus Width | 1 Core 64-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3, DDR3L |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | DUART, I2C, MMC/SD, SPI |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 3.53mm |
| Length | 37.5mm |
| RoHS Status | ROHS3 Compliant |
P5010NXN1QMB Overview
Packed in 1295-BBGA, FCBGA, the microprocessor is convenient for shipping overseas. A high level of reliability is provided by using an advanced packaging method Tray. In the CPU, there are 1 Core 64-Bit cores and 1 Core 64-Bit bus width. Understand how the operating temperature around -40°C~105°C TA is determined. The cpu microprocessor belongs to the QorIQ P5 series. The CPU is cored by a processor with a number of 0 cores. There are DDR3, DDR3L RAM controllers on this CPU. The microprocessor features interfaces DUART, I2C, MMC/SD, SPI for better service. In terms of uPs and uCs as well as peripheral ICs, this is a MICROPROCESSOR, RISC. Using P5010 will help you find variants of the cpu microprocessor. Using a 1.1V voltage supply, the microprocessor should turn on and run. The maximum supply current is 1.15V. This CPU has a wide external data Bus width of 64. CPU microprocessors with clock frequencies of 166MHz operate.
P5010NXN1QMB Features
PowerPC e5500 Core
P5010NXN1QMB Applications
There are a lot of NXP USA Inc. P5010NXN1QMB Microprocessor applications.
- Calculators
- Virtual reality VR robots
- PDAs, game consoles
- Copiers
- Electromechanical control
- Oil and gas
- Refrigerators
- Guidance-GPS
- Data acquisition and control
- Scanners
