P5010NXN1TNB
| Parameters | |
|---|---|
| Package / Case | 1295-BBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | QorIQ P5 |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | 3A991.A.1 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | P5010 |
| JESD-30 Code | S-PBGA-B1295 |
| Supply Voltage-Max (Vsup) | 1.15V |
| Supply Voltage-Min (Vsup) | 1.05V |
| Speed | 2.0GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e5500 |
| Clock Frequency | 166MHz |
| Address Bus Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 64 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Ethernet | 1Gbps (5), 10Gbps (1) |
| Number of Cores/Bus Width | 1 Core 64-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3, DDR3L |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | DUART, I2C, MMC/SD, SPI |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 3.53mm |
| Length | 37.5mm |
| RoHS Status | ROHS3 Compliant |
P5010NXN1TNB Overview
Since the microprocessor is packed in 1295-BBGA, FCBGA, shipping overseas is convenient. Using advanced packaging techniques Tray, high reliability is ensured. Cores/Bus width is 1 Core 64-Bit. The operating temperature around -40°C~105°C TA should be understood. It comes from the QorIQ P5 series. PowerPC e5500 processors are embedded in this CPU. It has DDR3, DDR3L RAM controllers. The microprocessor features interfaces DUART, I2C, MMC/SD, SPI for better service. It is a MICROPROCESSOR, RISC in terms of uPs/uCs/Peripheral ICs. Using P5010 will help you find variants of the cpu microprocessor. Using a 1.1V voltage supply, you should be able to operate the cpu microprocessor. A maximum supply current of 1.15V can be achieved by the microprocessor. With a 64 external data bus width, this CPU has a wide data bus. There is a clock frequency of 166MHz on the microprocessor.
P5010NXN1TNB Features
PowerPC e5500 Core
P5010NXN1TNB Applications
There are a lot of NXP USA Inc. P5010NXN1TNB Microprocessor applications.
- Blenders
- Paper shredders
- Safety -airbags, automatic braking system (ABS)
- Magnetic resonance imaging (MRI)
- Walkie talkies
- Digital TVs
- Entertainment products
- Projectors
- Consumer electronics products
- Telephone sets
