P5020NXN7QMB
| Parameters | |
|---|---|
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 64 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Ethernet | 1Gbps (5), 10Gbps (1) |
| Number of Cores/Bus Width | 2 Core 64-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3, DDR3L |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | DUART, I2C, MMC/SD, SPI |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 3.53mm |
| Length | 37.5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Package / Case | 1295-BBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | QorIQ P5 |
| JESD-609 Code | e1 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | 3A991.A.1 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | S-PBGA-B1295 |
| Supply Voltage-Max (Vsup) | 1.15V |
| Supply Voltage-Min (Vsup) | 1.05V |
| Speed | 2.0GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e5500 |
| Clock Frequency | 166MHz |
| Address Bus Width | 16 |
P5020NXN7QMB Overview
The embedded microprocessor has been packed in 1295-BBGA, FCBGA for convenient overseas shipping. High reliability is achieved with advanced packaging method Tray. A CPU with 2 Core 64-Bit cores and width 2 Core 64-Bit busses is used. Understand the operating temperature around -40°C~105°C TA. The cpu microprocessor belongs to the QorIQ P5 series. Core-wise, this CPU has a PowerPC e5500 processor. There are DDR3, DDR3L RAM controllers used by this CPU. Featuring DUART, I2C, MMC/SD, SPI interfaces, this microprocessor can better serve you. This is a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. A 1.1V voltage supply should be used to turn on and run the cpu microprocessor. The maximum supply current of this microprocessor is 1.15V. With a width of 64, this CPU has a wide external data bus. In this CPU microprocessor, the clock frequency is 0 Hz.
P5020NXN7QMB Features
PowerPC e5500 Core
P5020NXN7QMB Applications
There are a lot of NXP USA Inc. P5020NXN7QMB Microprocessor applications.
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Fire detection & safety devices
- Digital TVs
- Keyboards
- Traditional industrial transformation
- PDAs, game consoles
- Industrial robot
- Guidance-GPS
- DCS control intelligent sensor
- Toasters
