P5021NXE7VNC
| Parameters | |
|---|---|
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e5500 |
| Address Bus Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 64 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.0V 1.1V |
| Ethernet | 1Gbps (10), 10Gbps (2) |
| Number of Cores/Bus Width | 2 Core 64-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3, DDR3L |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | I2C, MMC/SD, PCIe, SPI, UART |
| Security Features | Boot Security, Cryptography, Secure Fusebox, Secure Debug, Tamper Detection, Volatile key Storage |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 3.53mm |
| Length | 37.5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Package / Case | 1295-BBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2012 |
| Series | QorIQ P5 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | 5A002.A.1 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | S-PBGA-B1295 |
| Supply Voltage-Max (Vsup) | 1.15V |
| Supply Voltage-Min (Vsup) | 1.05V |
| Speed | 2.0GHz |
P5021NXE7VNC Overview
Shipping overseas is convenient since the embedded microprocessor is packed in 1295-BBGA, FCBGA. A high level of reliability is provided by using an advanced packaging method Tray. 2 Core 64-Bit cores/Bus width are present in the CPU. Extended operating temperature around -40°C~105°C TA. A QorIQ P5 series item. PowerPC e5500 processors are embedded in this CPU. This CPU uses DDR3, DDR3L RAM controllers. To serve better this microprocessor features I2C, MMC/SD, PCIe, SPI, UART interfaces. At 1.0V 1.1V, the CPU runs its I/O. A MICROPROCESSOR, RISC represents the uPs/uCs/Peripheral ICs type. A 1.1V voltage supply should be used to turn on and run the cpu microprocessor. There is a maximum supply current of 1.15V in this microprocessor. There is a wide width of 64 on the external data bus of this CPU.
P5021NXE7VNC Features
PowerPC e5500 Core
P5021NXE7VNC Applications
There are a lot of NXP USA Inc. P5021NXE7VNC Microprocessor applications.
- Fax machines
- Magnetic resonance imaging (MRI)
- Binding machines
- Petrochemical
- Microwave ovens
- Oil and gas
- Current meter
- Consumer electronics products
- Process control devices
- Playstation
