P5040NSE7TMC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 1295-BBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~105°C TA |
| Packaging | Tray |
| Published | 2012 |
| Series | QorIQ P5 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | 5A002.A.1 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | S-PBGA-B1295 |
| Supply Voltage-Max (Vsup) | 1.15V |
| Supply Voltage-Min (Vsup) | 1.05V |
| Speed | 1.8GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e5500 |
| Clock Frequency | 166MHz |
| Address Bus Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 64 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.0V 1.1V |
| Ethernet | 1Gbps (10), 10Gbps (2) |
| Number of Cores/Bus Width | 4 Core 64-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3, DDR3L |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | I2C, MMC/SD, PCIe, SPI, UART |
| Security Features | Boot Security, Cryptography, Secure Fusebox, Secure Debug, Tamper Detection, Volatile key Storage |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 3.53mm |
| Length | 37.5mm |
| RoHS Status | ROHS3 Compliant |
P5040NSE7TMC Overview
Packed in 1295-BBGA, FCBGA, the microprocessor is convenient for shipping overseas. High reliability is achieved with advanced packaging method Tray. There are 4 Core 64-Bit cores per bus width on the CPU. It is important to understand the operating temperature around 0°C~105°C TA. This is a member of the QorIQ P5 series. The CPU is cored by a processor with a number of 0 cores. DDR3, DDR3L RAM controllers are used by this CPU. Featuring I2C, MMC/SD, PCIe, SPI, UART interfaces, this microprocessor can better serve you. At 1.0V 1.1V, the CPU runs its I/O. I would rate this as a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. Turn on the cpu microprocessor and let it run with a 1.1V voltage supply. It can supply a maximum current of 1.15V. The external data bus width of this CPU is 64. CPU microprocessors with clock frequencies of 166MHz operate.
P5040NSE7TMC Features
PowerPC e5500 Core
P5040NSE7TMC Applications
There are a lot of NXP USA Inc. P5040NSE7TMC Microprocessor applications.
- Nintendo
- Answering machines
- Hand-held metering systems
- Telephone sets
- Ipad
- Accu-check
- Toys
- Oscilloscopes
- Torpedo guidance
- Mobile computers
