banner_page

P5040NSE7VNC

1mm PowerPC e5500 Microprocessor QorIQ P5 Series 1.1V 1295-BBGA, FCBGA


  • Manufacturer: NXP USA Inc.
  • Nocochips NO: 568-P5040NSE7VNC
  • Package: 1295-BBGA, FCBGA
  • Datasheet: -
  • Stock: 184
  • Description: 1mm PowerPC e5500 Microprocessor QorIQ P5 Series 1.1V 1295-BBGA, FCBGA (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Package / Case 1295-BBGA, FCBGA
Surface Mount YES
Operating Temperature 0°C~105°C TA
Packaging Tray
Published 2012
Series QorIQ P5
JESD-609 Code e1
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
ECCN Code 5A002.A.1
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
HTS Code 8542.31.00.01
Technology CMOS
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 245
Supply Voltage 1.1V
Terminal Pitch 1mm
Time@Peak Reflow Temperature-Max (s) 30
JESD-30 Code S-PBGA-B1295
Supply Voltage-Max (Vsup) 1.15V
Supply Voltage-Min (Vsup) 1.05V
Speed 2.0GHz
uPs/uCs/Peripheral ICs Type MICROPROCESSOR, RISC
Core Processor PowerPC e5500
Clock Frequency 166MHz
Address Bus Width 16
Boundary Scan YES
Low Power Mode YES
External Data Bus Width 64
Format FIXED POINT
Integrated Cache YES
Voltage - I/O 1.0V 1.1V
Ethernet 1Gbps (10), 10Gbps (2)
Number of Cores/Bus Width 4 Core 64-Bit
Graphics Acceleration No
RAM Controllers DDR3, DDR3L
USB USB 2.0 + PHY (2)
Additional Interfaces I2C, MMC/SD, PCIe, SPI, UART
Security Features Boot Security, Cryptography, Secure Fusebox, Secure Debug, Tamper Detection, Volatile key Storage
SATA SATA 3Gbps (2)
Height Seated (Max) 3.53mm
Length 37.5mm
RoHS Status ROHS3 Compliant

P5040NSE7VNC Overview


The embedded microprocessor ships overseas conveniently packed in 1295-BBGA, FCBGA. High reliability is achieved with advanced packaging method Tray. CPUs have 4 Core 64-Bit cores/bus width. It is important to understand the operating temperature around 0°C~105°C TA. A QorIQ P5 series item. Core-wise, this CPU has a PowerPC e5500 processor. Memory controllers for this CPU are DDR3, DDR3L. Featuring I2C, MMC/SD, PCIe, SPI, UART interfaces, this microprocessor can better serve you. This CPU runs I/O at 1.0V 1.1V. I would rate this as a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. A 1.1V voltage supply should be used to turn on and run the cpu microprocessor. Supply current is maximum at 1.15V. There is a wide width of 64 on the external data bus of this CPU. CPU microprocessor clock frequency is 166MHz.

P5040NSE7VNC Features


PowerPC e5500 Core

P5040NSE7VNC Applications


There are a lot of NXP USA Inc. P5040NSE7VNC Microprocessor applications.

  • Industrial robot
  • Sonography (Ultrasound imaging)
  • Glucose monitoring systems (for Type 1 Diabetes)
  • Toys
  • Tape drives
  • Smart instruments
  • Robots
  • Switches
  • Air fryers
  • Instrument control

Write a review

Note: HTML is not translated!
    Bad           Good