P5040NSN7TMC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 1295-BBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~105°C TA |
| Packaging | Tray |
| Published | 2012 |
| Series | QorIQ P5 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | 3A991.A.1 |
| Terminal Finish | TIN SILVER COPPER |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | S-PBGA-B1295 |
| Supply Voltage-Max (Vsup) | 1.15V |
| Supply Voltage-Min (Vsup) | 1.05V |
| Speed | 1.8GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e5500 |
| Clock Frequency | 166MHz |
| Address Bus Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 64 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.0V 1.1V |
| Ethernet | 1Gbps (10), 10Gbps (2) |
| Number of Cores/Bus Width | 4 Core 64-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3, DDR3L |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | I2C, MMC/SD, PCIe, SPI, UART |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 3.53mm |
| Length | 37.5mm |
| RoHS Status | ROHS3 Compliant |
P5040NSN7TMC Overview
The microprocessor is convenient for international shipping since it is packaged in 1295-BBGA, FCBGA. High reliability is achieved with advanced packaging method Tray. This CPU has 4 Core 64-Bit cores and 4 Core 64-Bit bus widths. Recognize operating temperatures around 0°C~105°C TA. It comes from the QorIQ P5 series. The CPU is cored by a processor with a number of 0 cores. A CPU with this architecture uses DDR3, DDR3L RAM controllers. This microprocessor is equipped with an interface of I2C, MMC/SD, PCIe, SPI, UART. I/O is run at 1.0V 1.1V on this CPU. It is a MICROPROCESSOR, RISC in terms of uPs/uCs/Peripheral ICs. A 1.1V voltage supply should be used to turn on and run the cpu microprocessor. The maximum supply current is 1.15V. Its external data bus width is 64. CPU microprocessors with a clock frequency of 166MHz are used.
P5040NSN7TMC Features
PowerPC e5500 Core
P5040NSN7TMC Applications
There are a lot of NXP USA Inc. P5040NSN7TMC Microprocessor applications.
- Smoke alarms
- Heater/Fan
- Gas monitoring systems
- Washing machine
- 3D printers
- Speed meter
- Entertainment products
- Computer/laptop
- Medical instruments
- Missile control
