P5040NXE7VNC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 1295-BBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2012 |
| Series | QorIQ P5 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | 5A002.A.1 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | S-PBGA-B1295 |
| Supply Voltage-Max (Vsup) | 1.15V |
| Supply Voltage-Min (Vsup) | 1.05V |
| Speed | 2.0GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e5500 |
| Clock Frequency | 166MHz |
| Address Bus Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 64 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.0V 1.1V |
| Ethernet | 1Gbps (10), 10Gbps (2) |
| Number of Cores/Bus Width | 4 Core 64-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3, DDR3L |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | I2C, MMC/SD, PCIe, SPI, UART |
| Security Features | Boot Security, Cryptography, Secure Fusebox, Secure Debug, Tamper Detection, Volatile key Storage |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 3.53mm |
| Length | 37.5mm |
| RoHS Status | ROHS3 Compliant |
P5040NXE7VNC Overview
The microprocessor is conveniently packaged in 1295-BBGA, FCBGA, making it easy to ship internationally. High reliability is provided by the advanced packaging method Tray. There are 4 Core 64-Bit cores/bus width on the CPU. Be aware of the operating temperature around -40°C~105°C TA. From the QorIQ P5 series. A PowerPC e5500 processor powers this CPU. DDR3, DDR3L RAM controllers are used by this CPU. This microprocessor is equipped with an interface of I2C, MMC/SD, PCIe, SPI, UART. The CPU runs I/O at 1.0V 1.1V. I would rate this as a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. Using a 1.1V voltage supply, you should be able to operate the cpu microprocessor. With a maximum supply current of 1.15V, it has a maximum power consumption. The external data bus width of this CPU is 64. The embedded microprocessor has a clock frequency of 166MHz.
P5040NXE7VNC Features
PowerPC e5500 Core
P5040NXE7VNC Applications
There are a lot of NXP USA Inc. P5040NXE7VNC Microprocessor applications.
- Oil and gas
- Automatic control
- 3D printers
- Light sensing & controlling devices
- Xbox
- Multi-meter
- Calculators
- Ipad
- Hand-held metering systems
- Set-top boxes
