P5040NXN7VNC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 1295-BBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2012 |
| Series | QorIQ P5 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | 3A991.A.1 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | S-PBGA-B1295 |
| Supply Voltage-Max (Vsup) | 1.15V |
| Supply Voltage-Min (Vsup) | 1.05V |
| Speed | 2.0GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e5500 |
| Clock Frequency | 166MHz |
| Address Bus Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 64 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.0V 1.1V |
| Ethernet | 1Gbps (10), 10Gbps (2) |
| Number of Cores/Bus Width | 4 Core 64-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3, DDR3L |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | I2C, MMC/SD, PCIe, SPI, UART |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 3.53mm |
| Length | 37.5mm |
| RoHS Status | ROHS3 Compliant |
P5040NXN7VNC Overview
With a packing size of 1295-BBGA, FCBGA, this embedded microprocessor is ideal for international shipping. High reliability is provided by the advanced packaging method Tray. Cores/Bus width of the CPU is 4 Core 64-Bit . K-40°C~105°C TAw what the operating temperature is around -40°C~105°C TA. It comes from the QorIQ P5 series. The CPU is powered by a PowerPC e5500 core. A CPU with this architecture uses DDR3, DDR3L RAM controllers. This microprocessor features I2C, MMC/SD, PCIe, SPI, UART interfaces to better serve its users. At 1.0V 1.1V, the CPU runs its I/O. uPs/uCs/Peripheral ICs type is MICROPROCESSOR, RISC. Using a 1.1V voltage supply, you should be able to operate the cpu microprocessor. There is a maximum supply current of 1.15V in this microprocessor. 64 is the width of the external data bus on this CPU. 166MHz is the clock frequency of the embedded microprocessor.
P5040NXN7VNC Features
PowerPC e5500 Core
P5040NXN7VNC Applications
There are a lot of NXP USA Inc. P5040NXN7VNC Microprocessor applications.
- Mice
- Calculator
- Laminators
- Smart instruments
- Graphic terminals
- Instrument control
- Sonography (Ultrasound imaging)
- Nintendo
- Dialysis machines (performs function of liver)
- Heart rate monitors
