P82B96PWR
| Parameters | |
|---|---|
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Buffer, ReDriver |
| Applications | I2C |
| Subcategory | Other Interface ICs |
| Technology | BIPOLAR |
| Voltage - Supply | 2V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | P82B96 |
| Output | 2-Wire Bus |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Number of Channels | 1 |
| Operating Supply Current | 4mA |
| Nominal Supply Current | 900μA |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 270 ns |
| Logic Function | Buffer |
| Input | 2-Wire Bus |
| Driver Number of Bits | 2 |
| Receiver Number of Bits | 2 |
| Interface Standard | GENERAL PURPOSE |
| Data Rate (Max) | 400kHz |
| Supply Voltage1-Nom | 2.5V |
| Capacitance - Input | 4pF |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
P82B96PWR Overview
For convenience, power buffer comes packaged in 8-TSSOP (0.173, 4.40mm Width).In Tape & Reel (TR) packages, ready for power buffer.A universal mout that is easy to adapt.In terms of types, this is a typical Buffer, ReDriver.For this op amp buffer to function, it requires 2V~15V voltage.For the output quality to be maintained, 1 channels work together.There is 2-Wire Bus input facilitation.There should be a setting of -40°C~85°C for the operating temperature in order to avoid any malfunctions.The operational amplifier buffer is targeted at applications such as I2C and others.Try search with "P82B96" to get more pin-to-pin solutions for your special needs.There are two 8 terminals on the op amp buffer and you can find them at the end of the op amp buffer.As a result, 260 is the maximum temperature at which it can be reflowed.As long as the splitter is supplied with 5V voltage, it can perform a wide range of demanding tasks.It is important to note that the pinout of the Power buffer starts from the 8 pins that it has.2-Wire Bus capacitance for the input.It is equipped with 8 pins.In addition to the power buffer, other Other Interface ICs also play an important role.4mA is the voltage at which this power buffer operates.Using a 2-Bit receiver, it transmits and receives data.A nominal supply current of 900μA is recommended for normal operation of the splitter.The system supports 2 outputs in total.
P82B96PWR Features
1 channels.
Mainly used in I2C.
A standard Other Interface ICs.
2-Bit receiver.
2 outputs.
P82B96PWR Applications
There are a lot of Texas Instruments P82B96PWR Signal Buffers, Repeaters, Splitters applications.
- Loopback
- Multidrop Buses
- Communications Switchers
- Industrial Server
- Storage Area Networks
- Clock Distribution
- Add/Drop Muxes
- Test Equipment
- Backplane Interconnect
- Network Switches/Routers
