PAC1720-1-AIA-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PAC1720 |
| Function | Current Monitor |
| Output Type | Digital |
| Power Supplies | 3.3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Voltage - Input | 0V~40V |
| Nominal Supply Current | 525μA |
| Max Supply Current | 10A |
| Adjustable Threshold | YES |
| Quiescent Current | 525μA |
| Accuracy | ±1% |
| Common Mode Rejection Ratio | 80 dB |
| Sensing Method | High-Side |
| Height | 900μm |
| Length | 2.4mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
PAC1720-1-AIA-TR Overview
There is a package called Tape & Reel (TR) that contains buck boost converter.10-VFDFN Exposed Pad is the way in which voltage regulator is packaged.Mounted by Surface Mount is this current regulator.A maximum operating temperature of -40°C~85°C should not be exceeded during operation.Voltages of 0V~40V can be input as input voltages in this module.In addition to the 10 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.Moreover, current regulator is part of the PAC1720 family.Computers and other communication constant current regulators use 10 pins, which are pronged contacts.There is a Surface Mount mounting bracket on the back of this current regulator.It should work as long as it is powered by a 3.3VV power source. If it does not, it will not work.This power converter utiliPOWER SUPPLY SUPPORT CIRCUITes an analog integrated circuit (IC) called POWER SUPPLY SUPPORT CIRCUIT.Strong/weak growth of channels: 1.As long as 5.5V is supplied with the maximal voltage, the buck boost converter will work.As a result, these current regulations are included in a part called Power Management Circuits, which consists of these current regulations.A minimum supply voltage of 3V is required for its operation.3.3/5V power supplies are required to operate current regulation.As a result of the maximum supply current of 10A, maximum current regulator's design flexibility is possible.Regardless of external influence, it consumes 525μA of quiescent current.
PAC1720-1-AIA-TR Features
Tape & Reel (TR) package
PAC1720 family
The maximal supply voltage of 5.5V
3.3/5V power supplies
PAC1720-1-AIA-TR Applications
There are a lot of Microchip Technology PAC1720-1-AIA-TR Current Regulation/Managements applications.
- Current sensing
- Battery management
- Over-current measurement
- Battery chargers
- Industrial applications current measurement
- DC motor control
- Power supply current measurement
- Automotive current measurement
- Smart battery packs
- DC-to-dc converters
