PALC22V10B-15JC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 28 |
| JESD-609 Code | e0 |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 75°C |
| Min Operating Temperature | 0°C |
| Additional Feature | 10 MACROCELLS; 1 EXTERNAL CLOCK; SHARED INPUT/CLOCK; VARIABLE PRODUCT TERMS |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 10 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Frequency (Max) | 50MHz |
| Architecture | PAL-TYPE |
| Organization | 11 DEDICATED INPUTS, 10 I/O |
| Programmable Logic Type | OT PLD |
| Output Function | MACROCELL |
| Number of Dedicated Inputs | 11 |
| Number of Product Terms | 132 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5316mm |
| Width | 11.5316mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
PALC22V10B-15JC Overview
It is contained in package [0].As a result, it has 10 I/O ports programmed.Terminations of devices are set to [0].This electrical component has a terminal position of 0.The power source is powered by 5Vvolts.It belongs to the family [0].It is programmed with 28 pins.When using this device, 10 MACROCELLS; 1 EXTERNAL CLOCK; SHARED INPUT/CLOCK; VARIABLE PRODUCT TERMScan also be found.High efficiency requires a voltage supply of [0].The electronic component is mounted by Surface Mount.28pins are included in its design.There is a maximum supply voltage of 5.25Vwhen the device is operating.Despite its minimal supply voltage of [0], it is capable of operating.This device runs on 5Vvolts of electricity.The frequency that can be achieved is 50MHz.There should be a temperature above 0°Cat the time of operation.Ideally, the operating temperature should be below 75°C.The status of input signals is detected by 11dedicated inputs.A maximum frequency of less than 50MHzis recommended.Programmable logic types are divided into OT PLD.The output is configured with the value [0].This product has a total of 132 terms associated with it.
PALC22V10B-15JC Features
PLCC package
10 I/Os
28 pin count
28 pins
5V power supplies
10 outputs
PALC22V10B-15JC Applications
There are a lot of Cypress Semiconductor PALC22V10B-15JC CPLDs applications.
- Synchronous or asynchronous mode
- PULSE WIDTH MODULATION (PWM)
- DDC INTERFACE
- Discrete logic functions
- I/O PORTS (MCU MODULE)
- DMA control
- Boolean function generators
- Address decoding
- LED Lighting systems
- Dedicated input registers
