banner_page

PALC22V10D-15KMB

5V 1.27mm PMIC 24 Pin 83.3MHz 5V


  • Manufacturer: Cypress Semiconductor
  • Nocochips NO: 217-PALC22V10D-15KMB
  • Package: -
  • Datasheet: -
  • Stock: 846
  • Description: 5V 1.27mm PMIC 24 Pin 83.3MHz 5V (Kg)

Details

Tags

Parameters
Mount Surface Mount
Number of Pins 24
JESD-609 Code e0
Number of Terminations 24
ECCN Code 3A001.A.2.C
Terminal Finish Tin/Lead (Sn/Pb)
Max Operating Temperature 125°C
Min Operating Temperature -55°C
Additional Feature 10 MACROCELLS; 1 EXTERNAL CLOCK; SHARED INPUT/CLOCK; VARIABLE PRODUCT TERMS
HTS Code 8542.39.00.01
Subcategory Programmable Logic Devices
Technology CMOS
Terminal Position DUAL
Terminal Form FLAT
Peak Reflow Temperature (Cel) 240
Supply Voltage 5V
Terminal Pitch 1.27mm
Frequency 83.3MHz
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 24
Number of Outputs 10
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade MILITARY
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Number of I/O 10
Nominal Supply Current 130mA
Propagation Delay 15 ns
Frequency (Max) 83.3MHz
Architecture PAL-TYPE
Organization 11 DEDICATED INPUTS, 10 I/O
Programmable Logic Type FLASH PLD
Screening Level 38535Q/M;38534H;883B
Output Function MACROCELL
Number of Dedicated Inputs 11
Number of Product Terms 132
Radiation Hardening No
RoHS Status RoHS Compliant

PALC22V10D-15KMB Overview


The device is programmed with 10 I/Os.There is a 24terminations set on devices.Its terminal position is DUAL.The power supply voltage is 5V.It belongs to the family [0].The chip is programmed with 24 pins.This device also displays [0].If high efficiency is to be achieved, the supply voltage should be maintained at [0].The electronic component is mounted by Surface Mount.This board has 24 pins.In this case, the maximum supply voltage is 5.5V.A minimum supply voltage of 4.5V is required for this device to operate.This device runs on 5Vvolts of electricity.It is possible to achieve a frequency of 83.3MHz.Operating temperatures should be higher than -55°C.A temperature below 125°Cshould be used as the operating temperature.There are 11 dedicated inputs used to detect the status of input signals.Maximum frequency should be less than 83.3MHz.There is a type of programmable logic called FLASH PLD.The output configuration is set to [0].A total of 132product terms are available on it.

PALC22V10D-15KMB Features


10 I/Os
24 pin count
24 pins
5V power supplies
10 outputs

PALC22V10D-15KMB Applications


There are a lot of Cypress Semiconductor PALC22V10D-15KMB CPLDs applications.

  • Parity generators
  • Wireless Infrastructure Base Band Unit and Remote Radio Unit
  • Programmable polarity
  • Address decoders
  • Synchronous or asynchronous mode
  • Cross-Matrix Switch
  • INTERRUPT SYSTEM
  • Discrete logic functions
  • Bootloaders for FPGAs
  • I/O expansion

Write a review

Note: HTML is not translated!
    Bad           Good