PALC22V10D-7JC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 28 |
| JESD-609 Code | e0 |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 75°C |
| Min Operating Temperature | 0°C |
| Additional Feature | 10 MACROCELLS; 1 EXTERNAL CLOCK; SHARED INPUT/CLOCK; VARIABLE PRODUCT TERMS |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 10 |
| Nominal Supply Current | 140mA |
| Propagation Delay | 7.5 ns |
| Frequency (Max) | 166MHz |
| Architecture | PAL-TYPE |
| Organization | 11 DEDICATED INPUTS, 10 I/O |
| Programmable Logic Type | FLASH PLD |
| Output Function | MACROCELL |
| Number of Dedicated Inputs | 11 |
| Number of Product Terms | 132 |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
PALC22V10D-7JC Overview
The item is packaged with PLCC.There are 10 I/Os on the board.There is a 28terminations set on devices.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.An electrical supply voltage of 5V is used to power it.The part is included in Programmable Logic Devices.It is programmed with 28 pins.This device also displays [0].A high level of efficiency can be achieved by maintaining the supply voltage at [0].The electronic component is mounted by Surface Mount.There are 28 pins embedded in the device.It operates at a maximum supply voltage of 5.25V volts.The minimal supply voltage is 4.75V.It operates from 5V power supplies.There is 166MHz frequency that can be achieved.In order to operate properly, the operating temperature should be higher than 0°C.Temperatures should be lower than 75°C when operating.The status of input signals is detected by 11dedicated inputs.It should be below 166MHzat the maximal frequency.There is a type of programmable logic called FLASH PLD.This device has 10outputs configured.It is equipped with 132 product terms.
PALC22V10D-7JC Features
PLCC package
10 I/Os
28 pin count
28 pins
5V power supplies
10 outputs
PALC22V10D-7JC Applications
There are a lot of Cypress Semiconductor PALC22V10D-7JC CPLDs applications.
- Bootloaders for FPGAs
- Power Meter SMPS
- Address decoding
- Address decoders
- Preset swapping
- Cross-Matrix Switch
- I2C BUS INTERFACE
- Synchronous or asynchronous mode
- Boolean function generators
- ToR/Aggregation/Core Switch and Router
