PALCE16V8H-10PC/4
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Pin Count | 20 |
| JESD-30 Code | R-PDIP-T20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 75°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of I/O | 8 |
| Clock Frequency | 66.7MHz |
| Propagation Delay | 10 ns |
| Architecture | PAL-TYPE |
| Number of Inputs | 18 |
| Organization | 8 DEDICATED INPUTS, 8 I/O |
| Programmable Logic Type | EE PLD |
| Output Function | MACROCELL |
| Number of Dedicated Inputs | 8 |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.953mm |
| Length | 26.1366mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Surface Mount | NO |
| JESD-609 Code | e0 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
PALCE16V8H-10PC/4 Overview
This device has 8 I/O ports programmed into it.There is a 20terminations set on devices.The terminal position of this electrical component is DUAL.A voltage of 5Vprovides power to the device.This part is included in Programmable Logic Devices.With 20pins programmed, the chip is ready to use.In order for the device to operate, it requires 5V power supplies.Supply voltage (Vsup) reaches a maximum of 5.25V.The status of input signals is determined by 8dedicated inputs.If the supply voltage (Vsup) is greater than 4.75V, then the device will work properly.The clock frequency of this device should not exceed 66.7MHz.A programmable logic type is categorized as EE PLD.It is configured with 8 output.A total of 64product terms are available on it.It is recommended that the operating temperature be kept below 75°C.A total of 18inputs are used.
PALCE16V8H-10PC/4 Features
8 I/Os
20 pin count
5V power supplies
8 outputs
PALCE16V8H-10PC/4 Applications
There are a lot of Lattice Semiconductor PALCE16V8H-10PC/4 CPLDs applications.
- Multiple DIP Switch Replacement
- Parity generators
- I2C BUS INTERFACE
- Timing control
- Custom state machines
- Address decoding
- Cross-Matrix Switch
- D/T registers and latches
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Digital systems
