PALCE20V8-10JC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 28 |
| JESD-609 Code | e0 |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 75°C |
| Min Operating Temperature | 0°C |
| Additional Feature | 8 MACROCELLS; 1 EXTERNAL CLOCK; SHARED INPUT/CLOCK |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 62.5MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 8 |
| Nominal Supply Current | 115mA |
| Propagation Delay | 10 ns |
| Frequency (Max) | 62.5MHz |
| Architecture | PAL-TYPE |
| Organization | 12 DEDICATED INPUTS, 8 I/O |
| Programmable Logic Type | FLASH PLD |
| Output Function | MACROCELL |
| Number of Dedicated Inputs | 12 |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5316mm |
| Width | 11.5316mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
PALCE20V8-10JC Overview
It is contained in package [0].There are 8 I/Os programmed in it.There are 28 terminations programmed into the device.There is a QUADterminal position on the electrical part in question.A voltage of 5Vprovides power to the device.It is a part of the family [0].Chips are programmed with 28 pins.This device also displays [0].In order to achieve high efficiency, the supply voltage should be maintained at [0].Surface Mountis used to mount this electronic component.The 28pins are designed into the board.In this case, the maximum supply voltage is 5.25V.The device is designed to operate with a minimal supply voltage of 4.75VV.A total of 5V power supplies are needed to run it.This frequency is 62.5MHz.The operating temperature should be higher than 0°C.A temperature less than 75°Cshould be used for operation.It has 12dedicated inputs for detecting input signals.There should be a lower maximum frequency than 62.5MHz.There is a type of programmable logic called FLASH PLD.This device has 8outputs configured.The product is equipped with 64terms.
PALCE20V8-10JC Features
PLCC package
8 I/Os
28 pin count
28 pins
5V power supplies
8 outputs
PALCE20V8-10JC Applications
There are a lot of Cypress Semiconductor PALCE20V8-10JC CPLDs applications.
- Programmable polarity
- POWER-SAVING MODES
- Page register
- Auxiliary Power Supply Isolated and Non-isolated
- Custom shift registers
- Portable digital devices
- State machine design
- DMA control
- I/O expansion
- Handheld digital devices
