Parameters |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Switching Regulator or Controllers |
Max Power Dissipation |
980mW |
Terminal Position |
DUAL |
Base Part Number |
PAM2305 |
Function |
Step-Down |
Number of Outputs |
1 |
Efficiency |
96 % |
Output Voltage |
5.5V |
Output Type |
Adjustable |
Max Output Current |
1A |
Operating Supply Voltage |
5.5V |
Input Voltage-Nom |
3.6V |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2.5V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Operating Supply Current |
40μA |
Nominal Supply Current |
40μA |
Output Configuration |
Positive |
Max Output Voltage |
5.5V |
Voltage - Output (Min/Fixed) |
0.6V |
Topology |
Buck |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
1.5MHz |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
Yes |
Min Output Voltage |
600mV |
Max Junction Temperature (Tj) |
125°C |
Height |
630μm |
Length |
2.05mm |
Width |
2.05mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-WDFN Exposed Pad |
Number of Pins |
6 |
Weight |
21.092045mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2013 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
PAM2305CGFADJ Overview
There is an optimized performance in this voltage regulator because it utilizes the Tape & Reel (TR) package. A voltage regulator consists of 6 terminations. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. There is a 6-WDFN Exposed Pad package available for this voltage regulator, as DC DC switching regulator is space-saving. DC DC switching regulator is configured with 1 outputs. The adjusting voltage regulator generates Adjustable output. A Surface Mount mounting is required for this switching regulator. Voltage regulators should be operated at -40°C~85°C TA temperature while operating. There is a switching frequency of 1.5MHz for this voltage regulator 12v. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.6V. An input voltage of 3.6V is required to meet the requirements of the switching regulator operation. A voltage regulator 12v such as this falls under the Switching Regulator or Controllers category and belongs to this category. This DC/DC regulator belongs to the PAM2305 family. At 5.5V volts, voltage regulator can provide voltage. To operate the voltage regulator 12v, 6 pins are required. The output voltage of this voltage regulator 12v should at least be set at 600mV volts at all times. The maximum output current reaches 1A A to meet the switching regulator operation requirements. A maximum voltage of 5.5V can be obtained from the regulator voltage. 5.5V is the supply voltage for this DC-DC switching regulator. Adjusting voltage regulator reliable performance is ensured based on the minimal supply voltage of 2.5V V. It is able to operate from a maximum supply voltage of 5.5V, which is suitable for DC DC switching regulator's operation. Powered by a 40μA supply current, this DC-DC switching regulator operates on a DC-DC voltage.
PAM2305CGFADJ Features
1 outputs
6 pins
Operating supply voltage of 5.5V
PAM2305CGFADJ Applications
There are a lot of Diodes Incorporated PAM2305CGFADJ Voltage Regulators applications.
- CNC system
- Electrical power transmission
- Digital video recorders
- Network technology
- Computer application technology
- ATMs
- Laboratories
- Hydro power
- Lathes
- Smart grid