PAM2805AF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 2.4V |
| Terminal Pitch | 0.95mm |
| Frequency | 1MHz |
| Base Part Number | PAM2805 |
| Number of Outputs | 1 |
| Max Output Current | 750mA |
| Power Supplies | 0.9/3.2V |
| Max Supply Voltage | 5.5V |
| Max Output Voltage | 4.5V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 900mV |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 750mA |
| Internal Switch(s) | Yes |
| Number of Segments | 1 |
| Switching Frequency | 1MHz |
| Voltage - Supply (Min) | 0.9V |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PAM2805AF Overview
The board's SOT-23-6 package saves space. This LED driver has 1 outputs.As far as mounting is concerned, Surface Mount is adopted.When it emerges as a DC DC Regulator, it performs extremely well and is highly reliable.It is able to work normally at the operating temperature of -40°C~85°C TA.It operates on the basis of the frequency of 1MHz.In this case, the terminations are set to 6.It has a base of 6 pins.Undetermined failures may occur when the voltage supply is less than 0.9V.We estimate that there are 1 segments.The mount is in the way of Surface Mount.It can be found under the part number PAM2805.In this case, 5.5V is acceptable.According to its characteristics, it is also classified into Display Drivers.The input voltage must be minimally 900mV.It reaches 5.5V when the maximum supply current is allowed.The electronic component can fully perform its functions if the switching frequency is maintained at 1MHz.It is capable of delivering all benefits of a LED driver when operating with the maximal output current of 750mA.4.5V should be the maximum output voltage.
PAM2805AF Features
Available in the SOT-23-6 package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Supply voltage of 2.4V
Switching frequency of 1MHz
PAM2805AF Applications
There are a lot of Diodes Incorporated PAM2805AF LED Driver ICs applications.
- Other Electronic Devices
- OLED power supply for portable equipment
- Stage Lighting and Signage
- Industrial LED Lighting: Image Recognition Devices
- LED Lightings for Inspection Devices
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Down lights
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- A- lamps
- Dimmable LED for vehicle interiors
