PAM2808BLBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Current Rating | 750mA |
| Base Part Number | PAM2808 |
| Number of Outputs | 1 |
| Max Output Current | 1.5A |
| Max Supply Voltage | 6V |
| Output Current | 1.5A |
| Max Output Voltage | 6.3V |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6V |
| Output Current per Channel | 1.5A |
| Min Output Voltage | -300mV |
| Internal Switch(s) | Yes |
| Number of Segments | 1 |
| Nominal Input Voltage (DC) | 4.5V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PAM2808BLBR Overview
In order to save board space, the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package is used. In LED drivers, the outputs are all set to 1.The mounting method adopted is Surface Mount.With high efficiency and reliable performance, it emerges as a Linear.If the led driver ic is set to -40°C~85°C TA, it will work normally.In order for it to operate, it has 8 terminations.The base is configured with 8 pins.The number of segments is 1.It has been mounted on Surface Mount.There is a base part number PAM2808 for this LED driver.There is no maximum value acceptable for the supply voltage, so 6V is acceptable.With 2.5V as the minimal input voltage, it operates.The maximum supply current is 6V.There is no current available to supply to the load.When operating with a maximum output current of 1.5A, it can deliver all the benefits of a LED driver.If the output voltage exceeds 6.3V, it should be corrected.A minimum voltage of -300mV is maintained by its output.
PAM2808BLBR Features
Available in the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 4.5V
PAM2808BLBR Applications
There are a lot of Diodes Incorporated PAM2808BLBR LED Driver ICs applications.
- Stage and Studio lighting
- Sports Facility Lighting
- Dimmable LED for vehicle interiors
- White LED Backlight for portable equipment
- Portable lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Flicker-free LED Lighting using R1580N
- General lighting
- Constant Voltage Power Source for portable equipment
- LED Lighting PFCs, Linear Dimmable
