PAM2812ABR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Weight | 14.996898mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.95mm |
| Current Rating | 20mA |
| Frequency | 1kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PAM2812 |
| Number of Outputs | 4 |
| Output Voltage | 6V |
| Max Output Current | 20mA |
| Max Supply Voltage | 5.5V |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 20mA |
| Max Output Power | 400mW |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Nominal Input Voltage (DC) | 3.6V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PAM2812ABR Overview
Board space is saved by its SOT-23-6 Thin, TSOT-23-6 package.Typically, LED drivers have 4 outputs.Surface Mount is used to mount the led driver.It is highly performing and reliable when it emerges as a Linear.It is able to work normally at the operating temperature of -40°C~85°C TA.The benefits of Backlight are considerable.As a result, it operates based on the frequency of 1kHz.In this case, the termination value is 6.There are 6 pins used to form the base of its configuration.It's mounted by Surface Mount.You can find this LED driver under the base part number PAM2812.It is acceptable to operate with a supply voltage of 5.5V.Further, its characteristics allow it to be classified as Display Drivers.It operates with the minimal input voltage of 2.7V.In the event that the maximum supply current is allowed, it reaches 5.5V.In order to maintain maximum efficiency, the supply current cannot exceed 500μA.The load is capable of receiving 20mA current.A LED driver that operates at 20mA output current provides all the benefits of a LED driver.There is 6V voltage at the output terminal.
PAM2812ABR Features
Available in the SOT-23-6 Thin, TSOT-23-6 package
Operating temperature of -40°C~85°C TA
Frequency of 1kHz
Supply voltage of 3.6V
Output voltage of 6V
PAM2812ABR Applications
There are a lot of Diodes Incorporated PAM2812ABR LED Driver ICs applications.
- White LED Backlight for portable equipment
- Constant Voltage Power Source for portable equipment
- Replacement lamps
- A- lamps
- LED Lightings for Inspection Devices
- Portable lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Gallery lighting
- Medical surgery lighting
- OLED power supply for portable equipment
