PAM2842RGR
| Parameters | |
|---|---|
| Applications | Backlight |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | PAM2842 |
| Number of Outputs | 1 |
| Max Output Current | 3A |
| Max Supply Voltage | 40V |
| Plating | Gold |
| Wire Gauge (Max) | 24 AWG |
| Wire Gauge (Min) | 20 AWG |
| Output Current | 350mA |
| Max Output Voltage | 40V |
| Topology | SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 40V |
| Output Current per Channel | 3.5A |
| Min Output Voltage | -300mV |
| Current - Output / Channel | 3.5A Switch |
| Max Output Power | 30W |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Switching Frequency | 200kHz |
| Nominal Input Voltage (DC) | 24V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 20 |
| Material | Brass |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Crimp |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
PAM2842RGR Overview
In order to save board space, the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package is used. LED drivers designed using this technology use 1 outputs.As a mounting method, Surface Mount is used.As a DC DC Regulator, it has high efficiency and reliability.It is possible for the led driver ic to function normally at -40°C~85°C TA.It provides considerable benefits for Backlight.The configuration of the board is built around 20 pins.There is a mounting of it by Surface Mount.LED drivers have a base part number of PAM2842.There is no problem with the voltage of 40V.A voltage of 5.5V is its minimal input voltage.The maximum supply current is 40V.The current that can be supplied to the load is 350mA.This electronic component can fully perform when the switching frequency is 200kHz.When operating with a maximum output current of 3A, it can deliver all the benefits of a LED driver.It is important to keep the output voltage below 40V.It maintains a minimum voltage of -300mV.
PAM2842RGR Features
Available in the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~85°C TA
Switching frequency of 200kHz
PAM2842RGR Applications
There are a lot of Diodes Incorporated PAM2842RGR LED Driver ICs applications.
- Panel lighting
- Replacement lamps
- LED Lighting PFCs, Linear Dimmable
- Industrial LED Lighting: Image Recognition Devices
- Portable lighting
- OLED power supply for portable equipment
- Street lighting
- Linear fluorescent
- Gallery lighting
- Scanners and Handy Terminals
