PCA9517D
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Buffer, ReDriver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | I2C |
| Additional Feature | IT CAN ALSO OPERATE 0.9 TO 5.5 |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 0.9V~5.5V 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | CA9517 |
| Output | 2-Wire Bus |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 100mA |
| Power Supplies | 3/5V |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 1.5mA |
| Propagation Delay | 67 ns |
| Input | 2-Wire Bus |
| Data Rate (Max) | 400kHz |
| Capacitance - Input | 6pF |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PCA9517D Overview
For convenience, power buffer comes packaged in 8-SOIC (0.154, 3.90mm Width).It has been packaged into Tube packages, so power buffer is ready to be shipped.Adaptable universalism in a single mout.When it comes to types, this is a typical Buffer, ReDriver.There is 0.9V~5.5V 2.7V~5.5V voltage used to power this op amp buffer. It works on 0.9V~5.5V 2.7V~5.5V voltage.As a result, it facilitates 2-Wire Bus input.In order to avoid mal-functioning of the system, it is recommended that the operating temperature is set to -40°C~85°C.In addition to I2C, this operational amplifier buffer may also be used for other applications.Try search with "CA9517" to get more pin-to-pin solutions for your special needs.The op amp buffer has 8 terminals that can be found along its length.During reflow, it reaches a peak temperature of 260.When powered by 3V voltage, this splitter is capable of carrying out a number of demanding tasks.This power buffer has 8 pins as its pinout.In the output, 2-Wire Bus is used.8 pins are included in it.Power buffers like this one play a critical role in the industry.In order for this power buffer to operate, a voltage of 5mA must be applied.The repeters can be powered by 3/5V power supplies.Splitters should be powered by 1.5mA-volts under normal conditions.2 outputs can be output by it.Aside from IT CAN ALSO OPERATE 0.9 TO 5.5, the repeter is also specialized in certain areas.
PCA9517D Features
Mainly used in I2C.
A standard Line Driver or Receivers.
2 outputs.
IT CAN ALSO OPERATE 0.9 TO 5.5.
PCA9517D Applications
There are a lot of Texas Instruments PCA9517D Signal Buffers, Repeaters, Splitters applications.
- Cable Repeaters
- Storage Area Networks
- Data or Clock Signal Amplification
- DSLAMs
- Communications Switchers
- Servers
- Add/Drop Muxes
- Network Switches/Routers
- Desktop Computers
- Medical
