PCA9517DGKR
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Buffer, ReDriver |
| Applications | I2C |
| Additional Feature | IT CAN ALSO OPERATE 0.9 TO 5.5 |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 0.9V~5.5V 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | CA9517 |
| Output | 2-Wire Bus |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Power Supplies | 3/5V |
| Operating Supply Current | 5mA |
| Output Current | 6mA |
| Propagation Delay | 169 ns |
| Logic Function | Translator |
| Input | 2-Wire Bus |
| Data Rate (Max) | 400kHz |
| Capacitance - Input | 6pF |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PCA9517DGKR Overview
Several packaging options are available for convenient transportation, including 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).Packaged in Tape & Reel (TR) and ready for power buffer.An easy-to-adjust universal mout is included with the Surface Mount.It is important to note that this is a typical Buffer, ReDriver type.As a result, the op amp buffer is powered by 0.9V~5.5V 2.7V~5.5V voltage.Input of 2-Wire Bus is enabled by it.There should be a setting of -40°C~85°C for the operating temperature in order to avoid any malfunctions.Among other applications, this operational amplifier buffer targets the I2C platform.You can also try searching with "CA9517" when you need specific pin-to-pin solutions for your special needs.There are two 8 terminals on the op amp buffer and you can find them at the end of the op amp buffer.The peak reflow temperature of the material is 260.This splitter can accomplish a great deal of demanding work when supplied with 3V voltage.Power buffer pinout starts at 8 pins.Output is expressed in 2-Wire Bus.8 pins are present on the op amp buffers.There are other Line Driver or Receivers's in the industry that play a significant role, like the power buffer.The power buffer is powered by 5mA voltage.Power supplies of type 3/5V are sufficient to run the repeters.The spliter supports a total of 2 outputs.There should be a 6mA output from the spliter at the moment.Repeter and IT CAN ALSO OPERATE 0.9 TO 5.5 specialize in specifrepeter areas.
PCA9517DGKR Features
Mainly used in I2C.
A standard Line Driver or Receivers.
2 outputs.
IT CAN ALSO OPERATE 0.9 TO 5.5.
PCA9517DGKR Applications
There are a lot of Texas Instruments PCA9517DGKR Signal Buffers, Repeaters, Splitters applications.
- Desktop Computers
- Laptop Computers (for External Video Cards)
- Loopback
- Backplane Interconnect
- Digital Cross-Connects
- Network Switches/Routers
- Clock Distribution
- Cable Repeaters
- Multidrop Buses
- Portable IPC/HMI
