PCA9551D.112
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SO |
| Number of Pins | 16 |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 400kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Power Supplies | 2.5/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.3V |
| Power Dissipation-Max | 400mW |
| Nominal Supply Current | 500μA |
| Power Dissipation | 400mW |
| Max Supply Current | 500μA |
| Current - Output | 100mA |
| Interface IC Type | LED DISPLAY DRIVER |
| Low Level Output Current | 24mA |
| fmax-Min | 0.4 MHz |
| Number of Segments | 8 |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 1.45mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
PCA9551D.112 Overview
The SO package saves space on the board. In this case, the frequency is 400kHz.In this case, the terminations are set to 16.There are 16 pins on its base.The number of segments is estimated to be 8.The mount is on its way to Surface Mount.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.16 pins are included in it.Further, its characteristics allow it to be classified as Display Drivers.The maximum efficiency can be achieved by operating it at a minimal voltage of 2.3V.The device can deliver high efficiency when the maximal supply current is less than 500μA.Operating temperatures should not exceed 85°C in order to ensure stable operation.Stable operation requires a temperature higher than -40°C.In the case of this part, LED DISPLAY DRIVER identifies the interface IC.The part output current should be kept at 100mA.
PCA9551D.112 Features
Available in the SO package
Frequency of 400kHz
Supply voltage of 3.3V
PCA9551D.112 Applications
There are a lot of NXP Semiconductors / Freescale PCA9551D.112 LED Driver ICs applications.
- Portable lighting
- Down lighting
- Other Electronic Devices
- Linear fluorescent
- Gallery lighting
- LED backlight driver for LCD displays for portable equipment
- Architectural lighting
- LED Lightings for Inspection Devices
- Flicker-free LED Lighting using R1580N
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
