PCA9561PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Applications | Network, Telecom |
| Additional Feature | 6-BIT 5-TO-1 MULTIPLEXER |
| HTS Code | 8542.32.00.51 |
| Subcategory | Multiplexer/Demultiplexers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | PCA9561 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, SMBus |
| Load Capacitance | 10pF |
| Number of Inputs | 6 |
| Output Characteristics | OPEN-DRAIN |
| Output Polarity | TRUE |
| Logic IC Type | MULTIPLEXER |
| Max I(ol) | 0.008 A |
| Prop. Delay@Nom-Sup | 40 ns |
| Propagation Delay (tpd) | 40 ns |
| Height Seated (Max) | 1.1mm |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
PCA9561PW,112 Overview
20-TSSOP (0.173, 4.40mm Width)is an appropriate package for this device.A Tubecase is provided with it.Surface Mountis used to install this component.This is appropriate for the component that is applied in Network, TelecomIt is possible to find devices that supply 3V~3.6V volts.By using the [0], it is possible to find parts that are related.The terminations on it are [0].You should set this device to 3.3V.In order for the operation to be performed, the 20pins must be connected.Electronic components of the Multiplexer/Demultiplexersfamily are used.Potentiometers conduct at 85°C volts.Voltage at 3.3Vcan be delivered by the device.The component was designed to operate at a minimum temperature of -40°C.As a result of using this device, 6-BIT 5-TO-1 MULTIPLEXERcan also be established.A total of 6inputs are available for operation.This device is equipped with a logic IC type of [0].
PCA9561PW,112 Features
It is based on PCA9561.
Set the part at 3.3V volts
PCA9561PW,112 Applications
There are a lot of NXP USA Inc. PCA9561PW,112 Specialized Interface ICs applications.
- Precision instrumentation
- Relay replacements
- Short/Medium Loop: approximately 2000 ft. of 26 AWG,
- Mechanical reed relay replacement
- ?Cable Telephony – NIU, Set-Top Box, Home Side Box,
- Audio signal routing
- Multi-Line E1 Interface Cards
- RGB switches
- Microprocessor controlled systems
- Cell phones
