PCA9634PW
| Parameters | |
|---|---|
| Max Output Voltage | 5.5V |
| Voltage - Output | 5.5V |
| Min Input Voltage | 2.3V |
| Frequency - Switching | 1MHz |
| Max Input Voltage | 5.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | 50μA |
| Low Level Output Current | 200mA |
| Number of Segments | 8 |
| Multiplexed Display Capability | NO |
| Height | 950μm |
| Length | 6.6mm |
| Width | 4.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Packaging | Cut Tape |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Max Output Current | 25mA |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Power Dissipation | 400mW |
| Max Supply Current | 10mA |
| Current - Output | 25mA |
PCA9634PW Overview
Its TSSOP package is used to save board space. In this case, it operates with terminations of 0.It has a base configuration of 20 pins.The number of segments is estimated to be 8.There is a mounting of it by Surface Mount.5.5V is the output voltage.There are 20 pins on it.Moreover, it can be classified as Display Drivers due to its characteristics.A minimal input voltage of 2.3V is required for it to operate.The maximum supply current is reached when 5.5V is reached.Whenever the supply current is lower than 10mA, it can provide high efficiency.An operating temperature above 85°C should ensure stable operation.Stable operation requires an operating temperature greater than -40°C.In order to power systems, 5V voltage is needed.Even when operating at a maximal output current of 25mA, it is capable of delivering all the benefits of a LED driver.There's an interface IC marked with LED DISPLAY DRIVER on this part.It is important to keep the output voltage below 5.5V.Ensure that the part output current is 25mA.
PCA9634PW Features
Available in the TSSOP package
Supply voltage of 3.3V
Operating with the supply voltage of 5V
PCA9634PW Applications
There are a lot of NXP Semiconductors / Freescale PCA9634PW LED Driver ICs applications.
- Flicker-free LED Lighting using R1580N
- OLED power supply for portable equipment
- Scanners and Handy Terminals
- A- lamps
- Amusement Machines
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Down lights
- LED Lighting PFCs, Linear Dimmable
- Stage Lighting and Signage
- Down lighting
