PCA9635PW/Q900,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 100kHz~1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | PCA9635 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 2.5/5V |
| Current - Output / Channel | 25mA |
| Internal Switch(s) | Yes |
| fmax-Min | 1 MHz |
| Dimming | PWM |
| Number of Segments | 16 |
| Voltage - Supply (Max) | 5.5V |
| Voltage - Supply (Min) | 2.3V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Source Url Status Check Date | 2013-06-14 00:00:00 |
| Height Seated (Max) | 1.1mm |
| Length | 9.7mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
PCA9635PW/Q900,118 Overview
As a result of its 28-TSSOP (0.173, 4.40mm Width) package, it helps to save board space on the board. LED drivers are designed with 16 outputs.Surface Mount is used to mount the led driver.This emerges as a Linear with high efficiency and reliability.It is capable of operating at a temperature of -40°C~85°C TA. A number of benefits are available to Backlight.It operates on the basis of the frequency of 100kHz~1MHz.It operates with 28 terminations.It is possible for undetermined failures to occur if the voltage supply is lower than 2.3V.In total, it includes 16 segments.LED drivers have a base part number of PCA9635.There are 28 pins on it.Supply voltage can be set to a maximum value of 5.5V.As a result, it can also be classified as Display Drivers.LED drivers belonging to the Automotive, AEC-Q100 series have a wide range of applications.
PCA9635PW/Q900,118 Features
Available in the 28-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 100kHz~1MHz
Supply voltage of 3.3V
PCA9635PW/Q900,118 Applications
There are a lot of NXP USA Inc. PCA9635PW/Q900,118 LED Driver ICs applications.
- Linear fluorescent
- High-end retail lighting
- Dimmable LED for vehicle interiors
- Replacement lamps
- Down lights
- Architectural lighting
- OLED power supply for portable equipment
- LED Lightings for Industrial Equipment
- LED Lightings for Inspection Devices
- Industrial LED Lighting: Image Recognition Devices
