Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
Radial, Can - SMD |
Surface Mount Land Size |
0.406Lx0.406W 10.30mmx10.30mm |
Operating Temperature |
-55°C~105°C |
Packaging |
Tape & Reel (TR) |
Published |
2009 |
Series |
PCF |
Size / Dimension |
0.394Dia 10.00mm |
Tolerance |
±20% |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Termination |
SMD/SMT |
Type |
Polymer |
Max Operating Temperature |
105°C |
Min Operating Temperature |
-55°C |
Applications |
General Purpose |
Voltage - Rated |
20V |
Capacitance |
56μF |
Voltage - Rated DC |
20V |
ESR (Equivalent Series Resistance) |
40mOhm |
Polarity |
Polar |
Lifetime @ Temp |
2000 Hrs @ 105°C |
Ripple Current |
2.4A |
Life (Hours) |
2000 hours |
Ripple Current @ High Frequency |
2.4A @ 100kHz |
Diameter |
10mm |
Height |
8mm |
Height Seated (Max) |
0.315 8.00mm |
Length |
8mm |
RoHS Status |
ROHS3 Compliant |
The capacitance can run at the range of 56μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to PCF series. This part is mounted in the way of Surface Mount. The type of the PCF1D560MCL1GS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PCF1D560MCL1GS is suitable to conduct the ripple current at 2.4A. PCF1D560MCL1GS Capacitor is mounted by Surface Mount. The typical values of Voltage - Rated DC are 20V. PCF1D560MCL1GS Capacitor. It has SMD/SMT terminations in total. Voltage - Rated often has values of 20V. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C.
PCF Series
Capacitance: 56μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PCF1D560MCL1GS Aluminum Polymer Capacitors.
Typically, PCF1D560MCL1GS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- DC Buffering
- Spot Welding
- Coupling or blocking
- Lighting Ballast
- Power Factor Correction
- Motor Control
- DC Link
- Computer motherboards
- PFC
- Signal decoupling & power bypass