banner_page

PCG1A181MCL1GS

PCG Series 180μF 10V Aluminum Polymer Capacitors ±20% Radial, Can - SMD Surface Mount Tape & Reel (TR)


  • Manufacturer: Nichicon
  • Nocochips NO: 555-PCG1A181MCL1GS
  • Package: Radial, Can - SMD
  • Datasheet: PDF
  • Stock: 714
  • Description: PCG Series 180μF 10V Aluminum Polymer Capacitors ±20% Radial, Can - SMD Surface Mount Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case Radial, Can - SMD
Surface Mount Land Size 0.260Lx0.260W 6.60mmx6.60mm
Operating Temperature -55°C~105°C
Packaging Tape & Reel (TR)
Published 2009
Series PCG
Size / Dimension 0.248Dia 6.30mm
Tolerance ±20%
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Termination SMD/SMT
Type Polymer
Max Operating Temperature 105°C
Min Operating Temperature -55°C
Applications General Purpose
Voltage - Rated 10V
Capacitance 180μF
Voltage - Rated DC 10V
ESR (Equivalent Series Resistance) 25mOhm
Polarity Polar
Lifetime @ Temp 2000 Hrs @ 105°C
Leakage Current 360μA
Ripple Current 2.6A
Life (Hours) 2000 hours
Ripple Current @ High Frequency 2.6A @ 100kHz
Diameter 6.3mm
Height 6mm
Height Seated (Max) 0.236 6.00mm
Length 6mm
RoHS Status ROHS3 Compliant

The capacitance can run at the range of 180μF.


±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to PCG series. This part is mounted in the way of Surface Mount. The type of the PCG1A181MCL1GS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PCG1A181MCL1GS is suitable to conduct the ripple current at 2.6A. PCG1A181MCL1GS Capacitor is mounted by Surface Mount. The typical values of Voltage - Rated DC are 10V. PCG1A181MCL1GS Capacitor. There are 360μA to protect the current flowing from the ground conductor to ground. It has SMD/SMT terminations in total. Voltage - Rated often has values of 10V. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C.

PCG Series


Capacitance: 180μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~105°C

There are great quantities of applications of PCG1A181MCL1GS Aluminum Polymer Capacitors.


Typically, PCG1A181MCL1GS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.

  • Coupling or blocking
  • Flashtube Ignition
  • Smoothing Noise Filtering
  • DC/DC, DC/AC, and AC/AC converters
  • Bypassing Noise Filtering
  • To reduce power noise & signal noise
  • Computer motherboards
  • DC Link
  • UPS Buffering
  • Motor Start

Write a review

Note: HTML is not translated!
    Bad           Good