PCJ0E152MCL6GS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | Radial, Can - SMD |
| Surface Mount Land Size | 0.327Lx0.327W 8.30mmx8.30mm |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | PCJ |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Type | Polymer |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Applications | General Purpose |
| Voltage - Rated | 2.5V |
| Capacitance | 1500μF |
| Voltage - Rated DC | 2.5V |
| ESR (Equivalent Series Resistance) | 10mOhm |
| Polarity | Polar |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Ripple Current | 5.22A |
| Life (Hours) | 2000 hours |
| Ripple Current @ High Frequency | 5.22A @ 100kHz |
| Diameter | 8mm |
| Height | 10mm |
| Height Seated (Max) | 0.394 10.00mm |
| Length | 10mm |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 1500μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to PCJ series. This part is mounted in the way of Surface Mount. The type of the PCJ0E152MCL6GS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PCJ0E152MCL6GS is suitable to conduct the ripple current at 5.22A. PCJ0E152MCL6GS Capacitor is mounted by Surface Mount. The typical values of Voltage - Rated DC are 2.5V. PCJ0E152MCL6GS Capacitor. It has SMD/SMT terminations in total. Voltage - Rated often has values of 2.5V. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C.
PCJ Series
Capacitance: 1500μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PCJ0E152MCL6GS Aluminum Polymer Capacitors.
Typically, PCJ0E152MCL6GS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- To enhance power efficiency
- PFC
- Power Factor Correction
- Motor Start
- Bypassing Noise Filtering
- Audio Crossover
- DC Link
- Motor Control
- Flashtube Ignition
- Spot Welding
