PCJ0E222MCL1GS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | Radial, Can - SMD |
| Terminal Shape | FLAT |
| Surface Mount Land Size | 0.406Lx0.406W 10.30mmx10.30mm |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | PCJ |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Silver (Ag) |
| Applications | General Purpose |
| HTS Code | 8532.22.00 |
| Capacitance | 2200μF |
| Voltage - Rated DC | 2.5V |
| ESR (Equivalent Series Resistance) | 10mOhm |
| Polarity | POLARIZED |
| Size Code | 4141 |
| Voltage | 2.5V |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 1.1mA |
| Ripple Current | 5.5A |
| Life (Hours) | 2000 hours |
| Ripple Current @ High Frequency | 5.5A @ 100kHz |
| Dissipation Factor | 0.12 % |
| Diameter | 10mm |
| Height | 10mm |
| Height Seated (Max) | 0.394 10.00mm |
| Length | 11mm |
| Width | 10.3mm |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 2200μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to PCJ series. This part is mounted in the way of Surface Mount. The type of the PCJ0E222MCL1GS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PCJ0E222MCL1GS is suitable to conduct the ripple current at 5.5A. PCJ0E222MCL1GS Capacitor is mounted by Surface Mount. The typical values of Voltage - Rated DC are 2.5V. There are 2 terminals embeded in PCJ0E222MCL1GS Capacitor. There are 1.1mA to protect the current flowing from the ground conductor to ground. It has SMD/SMT terminations in total. The voltage for the part is specified as 2.5V volts.
PCJ Series
Capacitance: 2200μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PCJ0E222MCL1GS Aluminum Polymer Capacitors.
Typically, PCJ0E222MCL1GS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- To enhance power efficiency
- Coupling or blocking
- DC Buffering
- Signal decoupling & power bypass
- DC/DC, DC/AC, and AC/AC converters
- Flashtube Ignition
- Motor Start
- DC Link
- Power Line Buffering
- Computer motherboards
