PCJ0G331MCL1GS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | Radial, Can - SMD |
| Material | Polymer |
| Surface Mount Land Size | 0.260Lx0.260W 6.60mmx6.60mm |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | PCJ |
| Size / Dimension | 0.248Dia 6.30mm |
| Tolerance | ±20% |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Type | Polymer |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Applications | General Purpose |
| Voltage - Rated | 4V |
| Capacitance | 330μF |
| Voltage - Rated DC | 4V |
| ESR (Equivalent Series Resistance) | 15mOhm |
| Voltage | 4V |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 264μA |
| Ripple Current | 3.3A |
| Life (Hours) | 2000 hours |
| Ripple Current @ High Frequency | 3.3A @ 100kHz |
| Dissipation Factor | 0.12 % |
| Diameter | 6.3mm |
| Height | 6mm |
| Height Seated (Max) | 0.236 6.00mm |
| Length | 6mm |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 330μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to PCJ series. This part is mounted in the way of Surface Mount. The type of the PCJ0G331MCL1GS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PCJ0G331MCL1GS is suitable to conduct the ripple current at 3.3A. PCJ0G331MCL1GS Capacitor is mounted by Surface Mount. The typical values of Voltage - Rated DC are 4V. PCJ0G331MCL1GS Capacitor. There are 264μA to protect the current flowing from the ground conductor to ground. It has SMD/SMT terminations in total. Voltage - Rated often has values of 4V. The voltage for the part is specified as 4V volts. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C.
PCJ Series
Capacitance: 330μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PCJ0G331MCL1GS Aluminum Polymer Capacitors.
Typically, PCJ0G331MCL1GS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Flashtube Ignition
- Bypassing Noise Filtering
- Voltage Doubling
- Frequency Converters
- Spot Welding
- Signal decoupling & power bypass
- Audio Crossover
- Power Line Buffering
- Decoupling Noise Filtering
- Coupling or blocking
