banner_page

PCJ0J122MCL1GS

PCJ Series 1200μF 6.3V Aluminum Polymer Capacitors ±20% Radial, Can - SMD Surface Mount Tape & Reel (TR)


  • Manufacturer: Nichicon
  • Nocochips NO: 555-PCJ0J122MCL1GS
  • Package: Radial, Can - SMD
  • Datasheet: PDF
  • Stock: 591
  • Description: PCJ Series 1200μF 6.3V Aluminum Polymer Capacitors ±20% Radial, Can - SMD Surface Mount Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case Radial, Can - SMD
Dielectric Material Aluminium
Surface Mount Land Size 0.406Lx0.406W 10.30mmx10.30mm
Operating Temperature -55°C~105°C
Packaging Tape & Reel (TR)
Published 2007
Series PCJ
Size / Dimension 0.394Dia 10.00mm
Tolerance ±20%
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Termination SMD/SMT
Type Polymer
Max Operating Temperature 105°C
Min Operating Temperature -55°C
Applications General Purpose
Voltage - Rated 6.3V
Capacitance 1200μF
Voltage - Rated DC 6.3V
ESR (Equivalent Series Resistance) 12mOhm
Polarity Polar
Lifetime @ Temp 2000 Hrs @ 105°C
Leakage Current 1.512mA
Ripple Current 5.025A
Life (Hours) 2000 hours
Ripple Current @ High Frequency 5.025A @ 100kHz
Ripple Current (AC) 4.7A
Diameter 10mm
Height 10mm
Height Seated (Max) 0.394 10.00mm
Length 10mm
Width 10.3mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant

The capacitance can run at the range of 1200μF.


±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to PCJ series. This part is mounted in the way of Surface Mount. The type of the PCJ0J122MCL1GS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PCJ0J122MCL1GS is suitable to conduct the ripple current at 5.025A. PCJ0J122MCL1GS Capacitor is mounted by Surface Mount. The typical values of Voltage - Rated DC are 6.3V. PCJ0J122MCL1GS Capacitor. There are 1.512mA to protect the current flowing from the ground conductor to ground. It has SMD/SMT terminations in total. Voltage - Rated often has values of 6.3V. The dielectric materials are defined as Aluminium. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. The ripple current (AC) can be conducted at 4.7A.

PCJ Series


Capacitance: 1200μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~105°C

There are great quantities of applications of PCJ0J122MCL1GS Aluminum Polymer Capacitors.


Typically, PCJ0J122MCL1GS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.

  • PFC
  • UPS Buffering
  • Smoothing Noise Filtering
  • Spot Welding
  • Signal decoupling & power bypass
  • Flashtube Ignition
  • To reduce power noise & signal noise
  • Voltage Doubling
  • Server motherboards
  • Power Line Buffering

Write a review

Note: HTML is not translated!
    Bad           Good