banner_page

PCJ1C121MCL1GS

PCJ Series 120μF 16V Aluminum Polymer Capacitors ±20% Radial, Can - SMD Surface Mount Tape & Reel (TR)


  • Manufacturer: Nichicon
  • Nocochips NO: 555-PCJ1C121MCL1GS
  • Package: Radial, Can - SMD
  • Datasheet: PDF
  • Stock: 707
  • Description: PCJ Series 120μF 16V Aluminum Polymer Capacitors ±20% Radial, Can - SMD Surface Mount Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case Radial, Can - SMD
Number of Pins 2
Surface Mount Land Size 0.327Lx0.327W 8.30mmx8.30mm
Operating Temperature -55°C~105°C
Packaging Tape & Reel (TR)
Published 2009
Series PCJ
Size / Dimension 0.315Dia 8.00mm
Tolerance ±20%
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Termination SMD/SMT
Type Polymer
Max Operating Temperature 105°C
Min Operating Temperature -55°C
Applications General Purpose
Voltage - Rated 16V
Capacitance 120μF
Voltage - Rated DC 16V
ESR (Equivalent Series Resistance) 24mOhm
Voltage 16V
Lifetime @ Temp 2000 Hrs @ 105°C
Leakage Current 384μA
Ripple Current 3.01A
Life (Hours) 2000 hours
Ripple Current @ High Frequency 3.01A @ 100kHz
Dissipation Factor 0.12 %
Diameter 8mm
Height 6mm
Height Seated (Max) 0.276 7.00mm
Length 7mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

PCJ1C121MCL1GS Overview


The capacitance can run at the range of 120μF. ±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to PCJ series. This part is mounted in the way of Surface Mount. The type of the PCJ1C121MCL1GS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PCJ1C121MCL1GS is suitable to conduct the ripple current at 3.01A. PCJ1C121MCL1GS Capacitor is mounted by Surface Mount. The typical values of Voltage - Rated DC are 16V. PCJ1C121MCL1GS Capacitor. There are 384μA to protect the current flowing from the ground conductor to ground. It has SMD/SMT terminations in total. Voltage - Rated often has values of 16V. The voltage for the part is specified as 16V volts. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. There are 2 pins available in the part.

PCJ1C121MCL1GS Features


PCJ Series
Capacitance: 120μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~105°C

PCJ1C121MCL1GS Applications


There are great quantities of applications of PCJ1C121MCL1GS Aluminum Polymer Capacitors. Typically, PCJ1C121MCL1GS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.

  • DC/DC, DC/AC, and AC/AC converters
  • Bypassing Noise Filtering
  • Computer motherboards
  • Signal decoupling & power bypass
  • UPS Buffering
  • To reduce power noise & signal noise
  • Coupling or blocking
  • Flashtube Ignition
  • To enhance power efficiency
  • Spot Welding

Write a review

Note: HTML is not translated!
    Bad           Good