Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
Radial, Can - SMD |
Dielectric Material |
Aluminium |
Surface Mount Land Size |
0.327Lx0.327W 8.30mmx8.30mm |
Operating Temperature |
-55°C~105°C |
Packaging |
Tape & Reel (TR) |
Published |
2009 |
Series |
PCK |
Size / Dimension |
0.315Dia 8.00mm |
Tolerance |
±20% |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Termination |
SMD/SMT |
Type |
Polymer |
Max Operating Temperature |
105°C |
Min Operating Temperature |
-55°C |
Applications |
General Purpose |
Voltage - Rated |
2.5V |
Capacitance |
560μF |
Voltage - Rated DC |
2.5V |
ESR (Equivalent Series Resistance) |
9mOhm |
Voltage |
2.5V |
Lifetime @ Temp |
2000 Hrs @ 105°C |
Leakage Current |
420μA |
Ripple Current |
4.5A |
Life (Hours) |
2000 hours |
Ripple Current @ High Frequency |
4.5A @ 100kHz |
Diameter |
8mm |
Height |
7mm |
Height Seated (Max) |
0.276 7.00mm |
Length |
7mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
The capacitance can run at the range of 560μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to PCK series. This part is mounted in the way of Surface Mount. The type of the PCK0E561MCO1GS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PCK0E561MCO1GS is suitable to conduct the ripple current at 4.5A. PCK0E561MCO1GS Capacitor is mounted by Surface Mount. The typical values of Voltage - Rated DC are 2.5V. PCK0E561MCO1GS Capacitor. There are 420μA to protect the current flowing from the ground conductor to ground. It has SMD/SMT terminations in total. Voltage - Rated often has values of 2.5V. The voltage for the part is specified as 2.5V volts. The dielectric materials are defined as Aluminium. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C.
PCK Series
Capacitance: 560μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PCK0E561MCO1GS Aluminum Polymer Capacitors.
Typically, PCK0E561MCO1GS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- To enhance power efficiency
- DC Link
- Motor Control
- Signal decoupling & power bypass
- Voltage Doubling
- DC/DC, DC/AC, and AC/AC converters
- To reduce power noise & signal noise
- Bypassing Noise Filtering
- Spot Welding
- DC Buffering